Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  duke pushrods

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
duke pushrods by Pilrulz
Started on: 01-22-2002 09:23 PM
Replies: 1
Last post by: Fierobsessed on 01-23-2002 01:52 AM
Pilrulz
Member
Posts: 255
From: Hiawatha, Kansas
Registered: Aug 2001

Feedback score: N/A
Leave feedback

Rate this member
Report this Post01-22-2002 09:23 PM Click Here to See the Profile for PilrulzSend a Private Message to PilrulzDirect Link to This Post
According to haynes manual:

84: 9.754 in

85 and 86: 8.3996 in

87: 8.299 in

so im looking at this engine, but nobody knows what year it is. the pushrods are just under 9 inches long, does anybody know what year it is?

pil

IP: Logged
PFF
System Bot
Fierobsessed
Member
Posts: 4782
From: Las Vegas, NV
Registered: Dec 2001

Feedback score: N/A
Leave feedback





Total ratings: 147
Rate this member
Report this Post01-23-2002 01:52 AM Click Here to See the Profile for FierobsessedSend a Private Message to FierobsessedDirect Link to This Post
The engine will have the year printed either on top of the head below the valve cover or it will have it on the block behind the oil dip stick, another way to tell the year is, look into the holes where the lifters are, if there is metal brackets holding the lifters, its an 85 or 86. if it does not have the brackets its an 84, if the casting number is 10028058 then it is a 85 or 86.

------------------
Matt D
1984 Indy Fiero (auto)
1985 2m4 4T60, DIS V6 3.1 to be turbocharged

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock