Many of you will remember that I was looking for a complete set of aero parts to convert my 88 coupe.
Well, I found 'em. Came off an 86 SE. Got all the fascias, ground FX, brackets (all except the door sill brackets and rear wheelwells. Still in the works), and ribbed molding.

I know the front "waffle" is different.
My question is...
Are the front bumper bars the same? What about the thin sheet metal bracket that fastens just in front of the hood? The one that the very top edge of the fascia fastens to.

I don't want to remove anything from the donor car that I don't have to, as it's (probably) being reassembled with non-aero bodywork and resold.

Any help will be appreciated.

------------------
Raydar

From the Department of Redundancy Department.

quote Originally posted by Raydar: I know the front "waffle" is different. My question is... [b]Are the front bumper bars the same? What about the thin sheet metal bracket that fastens just in front of the hood? The one that the very top edge of the fascia fastens to. [/b]

The impact bars are the same....just put on the GT honeycomb and you're done.

The same goes for the metal bracket thing that the fascia bolts to.....they are the same on all Fieros.

Good luck....it sounds like a fun project!

Cool! Thanks, Mike!

------------------
Raydar

From the Department of Redundancy Department.

Hey Raydar, what are you doing with your round molding? I need a few of those

------------------
-Adam
sqoach@yahoo.com

86 SE V6 - daily driver

Squoach,
You have a PM