I have a crack/split about 2" vertically in the passenger side vent area of dash at the bottom of the vent on the left. Looks terrible.

Is this repairable or do I have to replace the entire dash just for this?

I repaired a couple of cracks in my dash using a bumper repair kit, as was suggested to me by another forum member.

I did a full write up, but for some odd reason I can't get the page to come up. Here's part of the aftermath of the dash repair. It links to the full instructions, but like I said, I have no idea why it's not working. Anybody have any ideas?

Bryce
88 GT

P.S. If the site won't work for another day, I'll explain it again (assuming you want to know how).

page loads right up now, on my old 266. Can I use the same procedure on the driver's side corner that always seem to crack?

quote Originally posted by Nashco: I repaired a couple of cracks in my dash using a bumper repair kit, as was suggested to me by another forum member.

You guys (and this forum) is great!

Thanks for all the info.