Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  What do i need to bolt a 2.8 v6 to a 4 cyl auto tranny ?

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
What do i need to bolt a 2.8 v6 to a 4 cyl auto tranny ? by fldevel
Started on: 11-13-2000 05:32 PM
Replies: 4
Last post by: Got2manyfieros on 11-14-2000 02:02 PM
fldevel
Member
Posts: 512
From: Lecanto,FL
Registered: Jan 2000

Feedback score: N/A
Leave feedback

Rate this member
Report this Post11-13-2000 05:32 PM Click Here to See the Profile for fldevelSend a Private Message to fldevelDirect Link to This Post
just waning a little input on what i need to do to put a v-6 in a 2m4 ..with the engine bolt up to the auto tranny or do i need anything special???
IP: Logged
PFF
System Bot
Indiana_resto_guy
Member
Posts: 7158
From: Shelbyville, IN USA
Registered: Jul 2000

Feedback score:    (15)
Leave feedback





Total ratings: 163
Rate this member
Report this Post11-13-2000 10:27 PM Click Here to See the Profile for Indiana_resto_guySend a Private Message to Indiana_resto_guyDirect Link to This Post
All you need are bolts and the flywheel off the V-6.
IP: Logged
tgowens
Member
Posts: 2496
From: Somewhere in my Fiero, of course!
Registered: Apr 2000

Feedback score: N/A
Leave feedback

Rate this member
Report this Post11-14-2000 03:33 AM Click Here to See the Profile for tgowensClick Here to visit tgowens's HomePageSend a Private Message to tgowensDirect Link to This Post
you might want the wiring harness and ECM from the v-6 too.......just make sure the harness and ECM are from a v-6 4-spd

------------------

www.tgowens.com/fiero - Blue '87 GT - Gold '87 GT
www.cfog.org - Classic Fiero Owners Group
http://www.fieroshop.net/ - Fiero Shop - Richmond, CA - 1-510-23-FIERO

IP: Logged
fldevel
Member
Posts: 512
From: Lecanto,FL
Registered: Jan 2000

Feedback score: N/A
Leave feedback

Rate this member
Report this Post11-14-2000 01:19 PM Click Here to See the Profile for fldevelSend a Private Message to fldevelDirect Link to This Post
is the auto tranny computer controled ?? or can u use the ECM from the doner car wich is a 4 sp manual ??
IP: Logged
Got2manyfieros
Member
Posts: 48
From: Connecticut USA
Registered: Nov 2000

Feedback score: N/A
Leave feedback

Rate this member
Report this Post11-14-2000 02:02 PM Click Here to See the Profile for Got2manyfierosSend a Private Message to Got2manyfierosDirect Link to This Post
If your car is an 84 you will need the entire in dash harness, the fuel lines, and a lot of patience.
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock