Bell Housing Bolt Patterns

Technical Discussion & Questions - Archive

T H I S I S A N A R C H I V E D T O P I C

Email This Page to Someone! | Printable Version

Bell Housing Bolt Patterns by V8 Fiero Fan

V8 Fiero Fan
Junior Member

Posts: 9
From: Clinton Twp., Michigan
Registered: Apr 2000

Feedback score: N/A
Leave feedback

Report this Post07-19-2000 08:10 AM

Does anyone know if the 4 cylinder and 6 cylinder bell housing bolt patterns the same?

Thanks for your responses.

IP: Logged

PFF

System Bot

Archie
Member

Posts: 9436
From: Las Vegas, NV
Registered: Dec 1999

Feedback score:

Total ratings: 547
Rate this member

Report this Post07-19-2000 08:15 AM

quote

Originally posted by V8 Fiero Fan:
Does anyone know if the 4 cylinder and 6 cylinder bell housing bolt patterns the same?

Thanks for your responses.

Yes, thay are the same.

Archie

IP: Logged

V8 Fiero Fan
Junior Member

Posts: 9
From: Clinton Twp., Michigan
Registered: Apr 2000

Feedback score: N/A
Leave feedback

Report this Post07-20-2000 12:48 PM

I was pretty sure of the answer, just needed someone to verify.

Thanks for the reply Archie.

IP: Logged

elfiero
Member

Posts: 291
From: mpls,mn,usa
Registered: May 2000

Feedback score: N/A
Leave feedback

Report this Post07-20-2000 02:53 PM

FYI,don't forget about the quad4,that has a
different bolt pattern.so you can't use that
transaxle if your doing a swap.

IP: Logged

All times are ET (US)


T H I S I S A N A R C H I V E D T O P I C