Lopsided chops? (Page 84/103)
Back On Holiday NOV 01, 02:58 AM

quote
Originally posted by Emc209i:


Lol, Cali is still lost in the dark. How do you know what's acceptable for you car if you don't know what key essential Fiero parts look like (In this case a cradle)?




heres a shot in the dark, i've yet to disassemble an 88 cradle, but i'm guessing that what calikid thinks was a cut cradle is really a stock cradle
Billybo455 NOV 01, 08:04 AM
this is like a horrible joke that's gone bad. madcurl has the duck and run tatic down for sure. you bring up his car and he completely omits reading any of that. it's kind of like when i made somewhat well thought out posts to him and he ignored me.

Cali- you sir are a joke. that is a stock cradle. i sure am glad someone that's built the worlds badest fiero doesn't know a stock cradle.

is there any place this thread can be completely closed in?

ps - Archie posted on RFT yesterday!!!! what's up with that?
troyboy NOV 01, 08:29 AM

quote
Originally posted by MstangsBware:




I think Archies exhaust are just fine:










Then we took it out get it ready to send to plating later this week.

Notice the equalizer pipe & notice that the tips & mufflers are clamp on because they will not be going to plating.
troyboy NOV 01, 08:36 AM

quote
Originally posted by Billybo455:

ps - Archie posted on RFT yesterday!!!! what's up with that?



Dude that's just shaun being the ass that he is.
California Kid NOV 01, 08:56 AM

quote
Originally posted by Billybo455:

Cali- you sir are a joke. that is a stock cradle. i sure am glad someone that's built the worlds badest fiero doesn't know a stock cradle.




Thank you !!! The whole thread is a big bad joke, people throwing stones on rumors that someone else's work isn't right. I don't spend my days looking at cradles, but I do know you have to modify a cradle to bolt in a 3800 or a V8.
You'd better being doing something to improve the strength over stock, because stock is not good enough for a high horsepower/torque engine, it's going to fail sooner than later.
Chicken McNizzle NOV 01, 11:47 AM

quote
Originally posted by California Kid:


but I do know you have to modify a cradle to bolt in a 3800.



Are you Serious!?!?!

Cali, do some research before a blanket statement like that!

I have PERSONALLY dropped in 7 3800 swaps in my lifetime and have NEVER ( repeat NEVER ) had to modify a cradle in any way, fashion, or form.

STOP READING AND BELIEVEING EVERYTHING YOU SEE ON THE INTERNET. I seriously don't know who the hell you have been talking to but you need to get some facts straight before making any kind of statement like that if your intentions are to have any credibility. Jesus Christ! P.M. a brutha and get some straight answers from those of us who have done these damn swaps instaead of all the mis and disinformation that the internet is known for.

I don't mean to make this seem as an attack on you, but your an intelligent guy - when I see statements like that spew from your username on the forum it bugs the crap out of me, you have been in the Fiero game long enough to know better.

------------------
Recanizin' Flat-Buns Since 2001

Eric Nelson
Internet Sales Manager
Power Ford Valencia
nelsone@autonation.com

Billybo455 NOV 01, 12:28 PM
how do you know what's done to my car? it is stock. with no cracks. many many passes's.
madcurl NOV 01, 12:42 PM
bishoptutu and his hatred crusade against V8Archie and his choptop creation.

Here's bishoptutu Man made doctrines:


quote
Originally posted by jmbishop:

According to some there are some choptops that have a obvious low side. This has never been proven or disproved, its never really been talked about on the forum until now and it has exploded. I honestly don't understand why it has caused the stir that it has, if I had known it would have been such a soft spot I might have kept my contributions to the debate to myself.




So now your saying, "ACCORDING TO SOME." That's strange, I only read (3) person with and your buddy Mstangbware as the spoke persons and now you're wondering "why" it has caused an issue.


quote
Originally posted by jmbishop:

The new thread is the appropriate place to discus the possibility of uneven chops, not for bashing.



So now you're calling it "POSSIBILITY" of uneven choptops. Before you ran to start another thread you just about swore by the testimonials of others it was uneven, but now it's "POSSIBILITES."

Lets recap. Before your admission this was your basis for the discussion;


quote
Originally posted by jmbishop:

I don't see it in the pictures at all, but its still hard to ignore the 3 people saying its off. The truth is that the only problem here is if the owners of the chops have a problem with the roof of there cars being a noticeable amount off.



This was "your moment" to shine with diginity by backing away. However, like a raging religous zealot bull you charge forward.


quote
Originally posted by jmbishop:

None of us have anything to gain from Archie's chops being off, and even if a few are a little off it really only matters to the owner of the cars. Neither of us have documentation and your trying to jump in without th information sitting in your garage. Like I keep saying I haven't and don't see it,I have seen the car at Loyde's but didn't payed much attention to it when I had the chance but there are three other who said they have. You could do us a favor and take a measuring tape to the 2 of yours you have access to. You have the ability so why not entertain us? If I owned a Archie chop as long as it wasn't to far off I think I could live with it. With wills permission if I'm ever able to get close to his car I will measure it if no one else has. If we're going to keep talking about this it need to go to PMs or start a new thread.




Please take notice;


quote
Originally posted by jmbishop:

None of us have anything to gain from Archie's chops being off. Like I keep saying I haven't and don't see it,I have seen the car at Loyde's but didn't payed much attention to it when I had the chance .



Nothing to gain huh? Yet you start another thread. No documentation huh, but still you continue. You stated you seen the (car), but didn't pay any attention, but you start another thread

Do us all a favor. Pull out your self-righteous sword from its sheet and fall upon it. For you have truly embarrass yourself, again.


bishoptutu and his Religious zealots (mstangbware) as they worship their false god howdy.
madcurl NOV 01, 01:15 PM

quote
Originally posted by Fastback 86:


When I see someone modified another person's username, it's generally for the purpose of ridiculing that person.




quote
Originally posted by WhiteDevil88:

But you have to be an ignorant nigga.
Sad.



Fatback 86's weak points........ Always crying about how "he's offended" while viewing the trash can, hehe.

Side note: Watch fastback 86 Goggle the word "fatback."

Fastback 86 NOV 01, 02:27 PM

quote
Originally posted by madcurl:


Fatback 86's weak points........ Always crying about how "he's offended" while viewing the trash can, hehe.

Side note: Watch fastback 86 Goggle the word "fatback."



Please, I'm not offended in the least. It's the internet. What I am is surprised, surprised at how little class you have and how eager you are to remind everyone of it publicly.