Lopsided chops? (Page 68/103)
madcurl OCT 13, 01:09 PM

quote
Originally posted by MstangsBware:


Well just so happens the picture posted shows that something is not correct. I mean if you looks at one side of the cover comapared to the other side, you can see it plain as day. So either the motor is not in correctly or the brace running across the back is not correct. Take your pick but something on the setup is not right.




Look at you, trying to draw some type of conclusion as-to the quality of #020, "something is not correct" similar words spoken by you at the beginning of this thread.


Let’s review the RFT insurgent “MstangBware” speculations and innuendoes;


quote
Originally posted by MstangsBware:

Would help if the line used for the measurements on the car where straight.





quote
Originally posted by MstangsBware:


There is no reason to measure--Put the car on level ground, step back behind it about 20' or so. Look at the Pass side NB areacompared to the DRV side NB area. You will see that the Pass side lays over more than the DRV side.

Like I said in the other Thread, if you are happy with the car then thats all that matters.



Very interesting isn’t it. Now D1S and his customers now need to use a balanced leveler to make sure that the engine is “true.”

As I’ve said, Kevin is calling you a liar and that you are jealous (I'm being nice in not using his words). Kevin is calling you out as-to DS1 installs to which there are 30 or mores builds.

Keep in mind, 30 or more D1S customers pass or present do not have any issues with D1S installs, but only MstangBware does. Now isn’t that interesting. I wonder why?

Let’s see why MstangBware has issues with #020.

1. #020 is at V8Archie (never mind that it’s a D1S install).
2. Jealous cause V8Archie is still in business and has client in nearly every corner of the USA.
3. MstangBware wishes he could build and tweak cars like V8Archie.
4. MstangBware is suffering from low self esteem, therefore hates anything & everything he can’t do himself so he lashes out at V8Archie nit-picking and challenging everything (facts are not required, just speculations and innuendoes).

Yeah, that about sums it up here, jealousy is MstangBware motives.
jmbishop OCT 13, 02:25 PM

quote
Originally posted by madcurl:


Very interesting isn’t it. Now D1S and his customers now need to use a balanced leveler to make sure that the engine is “true.”

As I’ve said, Kevin is calling you a liar and that you are jealous (I'm being nice in not using his words). Kevin is calling you out as-to DS1 installs to which there are 30 or mores builds.

Keep in mind, 30 or more D1S customers pass or present do not have any issues with D1S installs, but only MstangBware does. Now isn’t that interesting. I wonder why?

Let’s see why MstangBware has issues with #020.

1. #020 is at V8Archie (never mind that it’s a D1S install).
2. Jealous cause V8Archie is still in business and has client in nearly every corner of the USA.
3. MstangBware wishes he could build and tweak cars like V8Archie.
4. MstangBware is suffering from low self esteem, therefore hates anything & everything he can’t do himself so he lashes out at V8Archie nit-picking and challenging everything (facts are not required, just speculations and innuendoes).

Yeah, that about sums it up here, jealousy is MstangBware motives.




Your logic has been proven flawed repeatedly by me and even one of the pictures you posted clearly shows something is off.
madcurl OCT 13, 02:51 PM

quote
Originally posted by jmbishop:


Your logic has been proven flawed repeatedly by me and even one of the pictures you posted clearly shows something is off.



Why don't you start another thread base upon your hard evidence. I'm sure there's enough D1S installs to compare #020 with.


Or are you still preoccupied with trying to prove Archie's chop tops are lop-sided? Your weak court cases are backing up the system.
MstangsBware OCT 13, 04:32 PM

quote
Originally posted by madcurl:


Why don't you start another thread base upon your hard evidence. I'm sure there's enough D1S installs to compare #020 with.


Or are you still preoccupied with trying to prove Archie's chop tops are lop-sided? Your weak court cases are backing up the system.



The crank side of the motor is lower than the transmission side of the motor. You can clearly tell this by looking at the engine cover in the picture compared to the rear support running across. If its not the motor that is lower on one side then the rear support that looks to added in is not in there level. You take your pick and tell me which one it is. Something is not correct with the setup and it shows in the picture. And if you really wanna get down to it, the engine is also off front to back by a hair. You can see this if you just take a simple piece of college rule paper and use as a referance. But if you are happy with it then I am happy for you.

So how is D1S installs going theses days?

[This message has been edited by MstangsBware (edited 10-13-2008).]

Hulki U. My-BFF OCT 13, 06:45 PM

quote
Originally posted by MstangsBware:
Hey STUPID---Go back where I posted the picture of the N* and point out where I said Archee did the install. You have to be the biggest nutswinger I have ever seen post for someone and that's even beating out Madjurl. And you don't even have anything invested in Archee like MadJurl does.



Hey STUPID---I don't have to have anything invested in Archie to believe in his work. And yes I will stick up for him until the end, because he's done more for the Fiero community than you could ever dream of doing. Did Archie deny you a job too, is that why you stalk him like your leader does? You really are a pathetic little troll.
jmbishop OCT 13, 07:47 PM

quote
Originally posted by madcurl:


Why don't you start another thread base upon your hard evidence. I'm sure there's enough D1S installs to compare #020 with.


Or are you still preoccupied with trying to prove Archie's chop tops are lop-sided? Your weak court cases are backing up the system.



We shouldn't have pointed it out, we should have just ignored it so that some day we might see you at a show, you with your lopsided n* and Stephen with his straight ls4. It would have been great.
madcurl OCT 13, 07:57 PM

quote
Originally posted by jmbishop:


We shouldn't have pointed it out, we should have just ignored it so that some day we might see you at a show, you with your lopsided n* and Stephen with his straight ls4. It would have been great.




Sure, but you'll need to show-up at Archie's choptop reunion cause due to Jmbishop and MstangBware I find no need to attend any Fiero shows in TX. Oh yeah, don't forget to point out the "lop-sided" choptop while your at it (oh wait a minute, you can do that using #019.)
madcurl OCT 13, 08:00 PM

quote
Originally posted by MstangsBware:


So how is D1S installs going theses days?




I'm sure D1S number is listed. Give him a call. I already told Kevin about you and he is awaiting your call.

[This message has been edited by madcurl (edited 10-13-2008).]

jmbishop OCT 13, 08:01 PM

quote
Originally posted by madcurl:
Sure, but you'll need to show-up at Archie's choptop reunion cause due to Jmbishop and MstangBware I find no need to attend any Fiero shows in TX. Oh yeah, don't forget to point out the "lop-sided" choptop while your at it (oh wait a minute, you can do that using #019.)



Wow, you keep throwing that threat out there, but who do you think cares? I won't miss you.
madcurl OCT 13, 08:13 PM

quote
Originally posted by MstangsBware:
And if you really wanna get down to it, the engine is also off front to back by a hair.




Wow! I'd better get on phone with Kevin right now cause my engine is off by a hair!!!

MstangBware's swap; Yeah, it's off by a hair (I mean a mile,hehe)