Lopsided chops? (Page 60/103)
MstangsBware OCT 11, 02:52 PM

quote
Originally posted by Archie:

Maybe, I should have used Channel Iron cut in half like you did.





Archie



Those are mounting pads for my POLY mounts so maybe you should(you can tell this man has uses alot of angle iron in his lifetime). It is nice to see you take the time to looks at my Thread which I need to update sometime. You can save the pictures for future use if you would like. Post up some pictures of your mounts on some of your previous swaps so we can see what they look like. I mean I have posted up a few pictures of your water pump solution and that wonderful exhaust on the Stinger, I am sure your mounts are top notch just like both of them.

Face it--In the I make fast Fieros and big HP V-8s area--YOU FAIL!!!!!!!!!!!

In the I make Fiero's into exotic looking cars and bring new life to the Fiero body--You do a great job(well the guys in your shop do)

No matter what you post about my LS4 swap---When it is done--It will be faster than anything you ever built hands done and at a 1/4 of the price not to mention it will be using a junkyard motor/trans. That goes for if its crooked, uses channel iron for mounting pads, runs off water, ect.

[This message has been edited by MstangsBware (edited 10-11-2008).]

Archie OCT 11, 03:45 PM
Yep, you've been working on that LS4 for more than a year now & it's still lopsided.

You've attempted to sell it a couple of times, so you must be real proud of your work.

What do you think, think it'll be done in another year or maybe 2 years?

Maybe you'd do better at getting it put together by working more on your car & worrying less about me.

If you spent some serious time working on your car, you might have less time to be jealous of everyone else.

BTW: Nice welds on those suspension bushings you're using for engine mounts.

You've got at least 4 times as much Channel iron as I have angle iron. Do you get paid by the pound or the hour?

See 'Ya Loser.

Hey try this out www.spellcheck.com

Archie

Edited 2 minutes after posting for spelling check

[This message has been edited by Archie (edited 10-11-2008).]

MstangsBware OCT 11, 04:53 PM

quote
Originally posted by Archie:

Yep, you've been working on that LS4 for more than a year now & it's still lopsided.

You've attempted to sell it a couple of times, so you must be real proud of your work.

What do you think, think it'll be done in another year or maybe 2 years?

Maybe you'd do better at getting it put together by working more on your car & worrying less about me.

If you spent some serious time working on your car, you might have less time to be jealous of everyone else.

BTW: Nice welds on those suspension bushings you're using for engine mounts.

You've got at least 4 times as much Channel iron as I have angle iron. Do you get paid by the pound or the hour?

See 'Ya Loser.

Hey try this out www.spellcheck.com

Archie

Edited 2 minutes after posting for spelling check




Yeah--I have been working on it for a little over a year now but no big hurry on getting it done. I mean this is just a hobby for me so it is nothing I have to get done in a set amount of time. But when it is complete it will be faster than anything you ever built hands down cause all the **** you build it SLOW!!!!!!!!!!!!!!!!!.

I put it up for sale once when I was going to go with another swap(3800 Turbo) but I was talked into completing it by several friends. Also got discouraged working on it being everything had to be done from scratch being there is not kit to install the LS4.

I am shooing for having the swap complete in under 2 years so I still have a little time left to complete it. But when it is complete it will be hands down faster than any swap you ever built at 1/4 of the price.

I work on the car when I want as I am not in a big hurry to get it done. I already have a fast Fiero that has proved to be everything I wanted it to be so I can say I just don't have the drive most the time to go work on it. You should worry about trying to put together a fast Fiero so you can finally prove to everyone that you can build a fast V-8 that throws down the HP.

Thanks for the compliments on the welds--Not bad for a cracker box welder and someone that cant weld, they will hold and thats all that matters. The mounts are the bottom half of the mounts used for the poly engine mount that PR and WCF sells. So with that insult you are insulting them not me, way to go.

So where are the pictures of you mounts? I see you can talk about my mounts but will not post pictures of yours. Let's see some of your "Work Of Art" for mounts, I am sure they rank right up there with your crushed exhaust setups and micro filters off the MAF.

And I am still waiting on those dyno sheets from all these big bad V-8s you build.

And just so you know--The only reason I post all this is cause I am jealous of you and all that you have accomplished.

This is the internet not a Term paper--No need for spell check.
jmbishop OCT 11, 07:21 PM

quote
Originally posted by Archie:


Hey try this out www.spellcheck.com

Archie

Edited 2 minutes after posting for spelling check



you = fail
Archie OCT 11, 07:58 PM

quote
Originally posted by jmbishop:

you = fail



Wow, what a cool, sharp, witty, thing to say.

Let me try it

jmbishop = STUPID
jmbishop OCT 11, 08:37 PM
jmbishop's education > Archie's education.
madcurl OCT 11, 08:50 PM


quote
Originally posted by MstangsBware:


Yeah--I have been working on it for a little over a year now but no big hurry on getting it done. I put it up for sale once when I was going to go with another swap(3800 Turbo) but I was talked into completing it by several friends.




Well isn't that something. You were trying to sell that lop-sided engine you installed.



quote
Originally posted by MstangsBware:


What customers? I dont run a shop where I do swaps. I work on locals cars and sale parts to make extra money to spend on my swaps.





quote
Originally posted by madcurl:

Watch out! MstangBware feeble attempt at slandering V8Archie, but fails to look in the mirror, hehe.
jmbishop OCT 11, 09:04 PM
Not lopsided anymore smart guy. And if he had sold it lopsided the new owner could have fixed it just as easily since the most people who would be buying a project don't expect a finished product.
MstangsBware OCT 11, 09:09 PM

quote
Originally posted by madcurl:





I got a picture at home of a certain choptop with a 90's looking Camaro hatch on it that sports a not so str8 N*. I will post it when I get home in the morning. Humm--Wonder who's car that is?
madcurl OCT 11, 09:53 PM

quote
Originally posted by jmbishop:

Not lopsided anymore smart guy. And if he had sold it lopsided the new owner could have fixed it just as easily since the most people who would be buying a project don't expect a finished product.



Yeah, right. Customer don't expect a finished product.

You, JmBishop should start working for those Canadian guys who installs VDC kits, hehe.