Mounts - 1 installer - 0 (Page 5/11)
fieroX OCT 29, 06:53 PM

quote
Originally posted by PURPLE REIGN:


then the bashing continues with the welds.....................I've had it.



I said earlier that your welds are fine. They arent NASA certified or anything, but they wont break with a 3800 bolted to them.
PURPLE REIGN OCT 29, 08:33 PM

quote
Originally posted by fieroX:
1. Dates are right. I dont know the date I first inquired, but you replied on 7-29, and I sent you a pm back saying to get 3 sets ready. 2 weeks later on 8-13 you sent back saying you had 2 manual sets in stock, so I said to get 3 auto sets ready to ship. On 8-21 you said they would be done by the end of the week and on 9-2 you said they were done. Paid on the 5th and recieved on the 20th.

My point is, I will have the ability to have mounts in my customers hands within 10 days of ordering. But im not bltching about that.

2. Steel prices have dropped like a rock. Have you not been paying attention to the economy crisis? They were paying $160 a ton earlier this summer for scrap cars. Now they are paying $70. You might want to get ahold of your supplier and ask for a better deal cause they have you in the ringer.

3. I run a business too, and a lot of my business comes from the guys on here. So I pay attention to their needs so I can make my business better and help the Fiero community. You might try that someday.

4. I didnt think I needed to read a 400 post thread to find out your mounts dont line up. I can buy headers from zzp and I bet they line up with my heads.



1) Not bad considering they weren't in stock. When they are in stock they get there in 2 days. Ask those who have got them when in stock.

2) The price of scrap doesnt directly reflect the purchase price of prepared steel. Around here we were getting $200 a ton this summer and a $100 a ton currently. Prepared steel is still at a premium

3) I do it as often as required on here since I dont rely on this forum as my line of business.

4) Read it again.........................IT'S ON THE FIRST PAGE !!!!
fieroX OCT 29, 10:47 PM
/thread
Oreif OCT 30, 07:04 AM

quote
Originally posted by fieroX:

and you know what? that 10.3 pass, has anybody ever proved it with a video or anything? I can go to the track friday night and take a 9 second timeslip and tell everyone I ran 9's but until Its proven with a video it means jack.



Here we go again. They ask for proof, a timeslip gets posted, and they demand more proof because they don't believe it.
If you have a hard time believing it why not go to Archie's website and look under "customer cars" for Pat Ciarcia. Here is the link for you: http://www.v8archie.com/pat.htm
Better yet call him and ask him.
Here is his recent contact info:
Pat Ciarcia
P.O Box 413
Pocono Summit, PA 18346
Email: candcsportsproductions@yahoo.com
Ph. 570-839-6551

You can ask him for his catalog too!
"A catalog is available upon request showing the necessary parts proven to be reliable enough for the task. It comes complete with 35 mm color photo's.
The Catalog contains some custom parts available through my company, C&C performance. Such as Custom NHRA approved Roll bar, dropped front and rear spindles, heavy duty rear support axle bearings, Fuel cells, fuel pumps, Nitrous kits, racing seats, harness, Complete racing Automatic transaxles, Racing wheel stud kits. Along with complete front hub, brake rotor, bearings and racing studs installed, ready to bolt on.

So you get a list of the parts he made and used as well as pictures! Who knows maybe he has some parts you can use as well.


BTW ~ The car was built and run long before there was a YouTube and the popularity of making video's to post online. If I recall it was during the mid-90's when he raced it.

[This message has been edited by Oreif (edited 10-30-2008).]

riceviper OCT 30, 10:03 AM
Hey look if it truely that fast thats awesome tell him we should setup a race next spring! He better be faster than 10.30!
MstangsBware OCT 30, 04:34 PM

quote
Originally posted by Oreif:


Here we go again. They ask for proof, a timeslip gets posted, and they demand more proof because they don't believe it.
If you have a hard time believing it why not go to Archie's website and look under "customer cars" for Pat Ciarcia. Here is the link for you: http://www.v8archie.com/pat.htm
Better yet call him and ask him.
Here is his recent contact info:
Pat Ciarcia
P.O Box 413
Pocono Summit, PA 18346
Email: candcsportsproductions@yahoo.com
Ph. 570-839-6551

You can ask him for his catalog too!
"A catalog is available upon request showing the necessary parts proven to be reliable enough for the task. It comes complete with 35 mm color photo's.
The Catalog contains some custom parts available through my company, C&C performance. Such as Custom NHRA approved Roll bar, dropped front and rear spindles, heavy duty rear support axle bearings, Fuel cells, fuel pumps, Nitrous kits, racing seats, harness, Complete racing Automatic transaxles, Racing wheel stud kits. Along with complete front hub, brake rotor, bearings and racing studs installed, ready to bolt on.

So you get a list of the parts he made and used as well as pictures! Who knows maybe he has some parts you can use as well.


BTW ~ The car was built and run long before there was a YouTube and the popularity of making video's to post online. If I recall it was during the mid-90's when he raced it.




What's the car running now and how many 10.3 passes did it make?
fieroX OCT 30, 04:44 PM

quote
Originally posted by MstangsBware:


What's the car running now and how many 10.3 passes did it make?



Stephen, check your inbox.
Oreif OCT 30, 09:10 PM

quote
Originally posted by MstangsBware:


What's the car running now and how many 10.3 passes did it make?



I don't know, Why don't you ask him? His Email is listed in my post.
pontiackid86 OCT 30, 10:29 PM
aww s*** another pissin contest for the trash can
Hulki U. My-BFF OCT 31, 06:56 AM

quote
Originally posted by pontiackid86:

aww s*** another pissin contest for the trash can



My d1cks bigger than your d1ck.