 
     |
| Who is waiting for a harness from Loyde Rascoe at Fastfieros? (Page 38/49) |
|
PBJ
|
MAY 07, 09:49 AM
|
|
"I am going out on a limb here" Lloyd and would wager to bet you treat your family much the same as you treat the "hands that feed you" From what I know about you, I would not want to be in your family either. I can imagine you treat everyone in your life poorly. Its just that much more is expected in this community!
Pete
------------------
 [This message has been edited by PBJ (edited 05-07-2009).]
|
|
|
Dennis LaGrua
|
MAY 07, 10:08 AM
|
|
| quote | | I have to fix other peoples DIY crap like Dennis, Dan, and some others because they cannot support the customers in the end to end resolution when things go wrong. |
|
Its funny that you keep mentioning my crap. One thing that you did get correct was that anything I sold was in kit form. When you sell in kit form the installer takes responsibility for the installation. Those turbo kits fit fine and in most cases the installs were done correctly and the kits worked great. Those turbo kits required a bit of manual dexterity to install. In a few cases the installtion was botched by the installer. Most of those kits are still running today 8 years later.
Let us not all forget that I had to reprogram the PCM that I purchased from you as the MAF vlaues weren't even close. The deal was that the PCM was to get me started but geeze it barely ran the engine. Now I do all of my own programming and everything works fine. The one that you programmmed for Winkie, a guy in my club gets poor mileage and also needs reprgramming.
People in glass houses shouldn't throw stones and businesses who take orders should deliver quality, and service on each one. Customers are not an annoyance but the very purpose for which your business exists. Do you have any obligation to your customer base?
the bottom line is that flaming me, Dan, Archie, Darkhorizon, & PBJ won't put you back in business.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
Oreif
|
MAY 07, 12:17 PM
|
|
| quote | Originally posted by Dennis LaGrua:
Its funny that you keep mentioning my crap. One thing that you did get correct was that anything I sold was in kit form. Most of those kits are still running today 8 years later.
|
|
There is a local member who has one of Dennis' kits. Aside from the kit he added his own intercooler and the car still runs great today without any problems.
|
|
|
|
FastFieros
|
MAY 07, 12:21 PM
|
|
| quote | Originally posted by Dennis LaGrua:
Its funny that you keep mentioning my crap. One thing that you did get correct was that anything I sold was in kit form. When you sell in kit form the installer takes responsibility for the installation. Those turbo kits fit fine and in most cases the installs were done correctly and the kits worked great. Those turbo kits required a bit of manual dexterity to install. In a few cases the installtion was botched by the installer. Most of those kits are still running today 8 years later.
Let us not all forget that I had to reprogram the PCM that I purchased from you as the MAF vlaues weren't even close. The deal was that the PCM was to get me started but geeze it barely ran the engine. Now I do all of my own programming and everything works fine. The one that you programmmed for Winkie, a guy in my club gets poor mileage and also needs reprgramming.
People in glass houses shouldn't throw stones and businesses who take orders should deliver quality, and service on each one. Customers are not an annoyance but the very purpose for which your business exists. Do you have any obligation to your customer base?
the bottom line is that flaming me, Dan, Archie, Darkhorizon, & PBJ won't put you back in business.
|
|
With people like you guys for friends, who needs enemies... I remember a time that you very people posting crap about my family and life sat there behind that keyboard and defended other PFF members on this forum when the RFT type rejects attacked family and the home life. You got those big hairy balls behind the keyboard, but in person when confronted with the same conversion you are all smiles and apologies... I can assure you that I am the same person behind the keyboard as I am in person. If I dont like you and dont agree with something, I will let you know in person. As to you people posting you would never be a customer, that is fine by me. What I perceive as idiots and two faced postings leaves me with the thought I would NOT WANT YOU as a customer period. So thank you ....
Ring ring ring.... is that my phone again with another customer wanting to do business with FastFieros of Dallas ..... Why yes it is ... and they want a 3800 quality low mount alt with dogbone support machined and programmed 100% by Loyde with the finest CNC mill and lathe equipment...
|
|
|
|
larini74
|
MAY 07, 12:38 PM
|
|
Gee Loyde, maybe if you spent more time catching up on work that you owe people instead of ragging on others on the forum, you might catch up
a bit quicker and people wouldn't be so ticked off at you!!!!!
|
|
|
|
Oreif
|
MAY 07, 12:43 PM
|
|
| quote | Originally posted by FastFieros:
As to you people posting you would never be a customer, that is fine by me. What I perceive as idiots and two faced postings leaves me with the thought I would NOT WANT YOU as a customer period. So thank you ....
|
|
So because many think your business practices of late are wrong, we're "idiots"???
Geez, You really don't get it do you?
| quote | Originally posted by FastFieros:
Ring ring ring.... is that my phone again with another sucker wanting to do get ripped off by FastFieros of Dallas ..... Why yes it is ... and they want a 3800 quality low mount alt with dogbone support machined and programmed 100% by Loyde the con-artist.
|
|
I fixed your post.
The question is how long will they have to wait to actually see the part? 6 months? 9 months? 3 years?
Exactly how do you "program" a "low mount alt with dogbone support"? What do you charge them for the "programming"?[This message has been edited by Oreif (edited 05-07-2009).]
|
|
|
|
PBJ
|
MAY 07, 12:46 PM
|
|
| quote | Originally posted by FastFieros:
Ring ring ring.... is that my phone again with another customer wanting....
|
|
I doubt it, jump back into reality. First off, you likely will not even answer the phone. Second, its likely a pissed off 3 year old customer or a creditor. Third, your family and you gotta leave us again, snif. You got one thing correct...if it is a customer they certainly want something from you, just will they ever get it?
Pete
------------------
|
|
|
|
Tony Kania
|
MAY 07, 12:54 PM
|
|
I have never read this posting until this morning. And I keep my opinions to myself. Unless dirtballs like you surface. Loyde Rascoe, you are a loser. Never will anyone who actually reads this will ever buy stuff from you. I read that you think that everyone that posts against you in this matter are only tough because we sit behind the keyboard. Well, I am sitting behind my keyboard, and standing behind all that you screwed. If ever I meet you face to face, believe me I will state my opinions of you directly. You are a crook, liar, and cheat. POS! It seems that you are the tough one behind the computer. Dirt! That is what you are, and what you always will be. Dirt!
For the rest of us, sorry. Rant is over. Just really hate crooks. Those that actually earn a living have my respect. I read every word posted to this thread this morning. Just completely disgusted to have him in our community. To the rest of you, good luck to you and yours. To Loyde Dirtball, karma will find you. ------------------
|
|
|
|
PK
|
MAY 09, 08:08 AM
|
|
| quote | Originally posted by AkursedX:
So Lloyd, here is a list of all the people who have posted in this thread who are missing parts and/or cars:
aris- harness
carbonfiberkid- parts/harness
muttly69gto- harness
top-dawg- harness
DJRice- unknown
Charlie64- body kit/engine
Genopsyde- harness/pcm tune
petek- harness
onixfiero- engine swap
Andrew Allison (via kyunderdawg)- harness
fanatic- pcm
Will-Martin- engine swap
Instead of entertaining us with posts about someone's private life, how about updating us with the status of all of these people's situations? |
|
|
|
|
|
avengador1
|
MAY 09, 02:49 PM
|
|
|
As I said before, Fastfieros is going to have to eat a lot of crow before people trust him again. I think it is best if he didn't go around insulting other vendors or competitors, it just makes him look bad. By the way, I would like to know if he has started work on Reverend Fiero's harness, that was ordered over two years ago. I know Andy is too polite to ask anymore, especially since most of his queries, about his order, went unanswered by Loyde.
|
|
|
|