
 |
| Project Genisis Lo Budget 3800SC (Page 34/42) |
|
fieroaddicted
|
FEB 02, 03:51 PM
|
|
What is this gauge out of? It's probably ok I would think. I take it the car is running well?
Nice build by the way... I see i have the same "Eaton Inside" sticker on my back window. lol
|
|
|
hercimer01
|
FEB 02, 09:20 PM
|
|
Yes the car has never ran better. Knock on wood.
I got the gauge on eBay from Fieroaddiction. It's a later one that's all I know.
|
|
|
hercimer01
|
FEB 04, 12:03 AM
|
|
It's hard getting the lighting just right. The overlays look good but getting the distribution is a challenge.
|
|
|
hercimer01
|
FEB 08, 01:36 AM
|
|
 Notice I installed the Performance shift light too!!


Before. Notice how faded the needles are.

After.
|
|
|
hercimer01
|
MAR 02, 10:39 AM
|
|
|
|
hercimer01
|
MAR 12, 01:14 AM
|
|
|
|
hercimer01
|
MAR 17, 11:43 PM
|
|
|
|
hercimer01
|
MAR 31, 02:38 AM
|
|
I picked up a set of INTENSE-Racining 1.9 Ratio Rockers in the Mall. I am literally afraid to drive the car on the streets now, it was scary fast before. I started it and it sounds good,but haven't test driven it yet. I didn't want to wake up the neighbors at 11:30 on a Sun. night.




I cleaned out the stud holes with a QTip and compressed air



Then I torqued them to 11 FT Lbs, +90 deg with red Lock Tight.


Then I started it up after I did the other side just the same.
|
|
|
hercimer01
|
APR 20, 12:51 AM
|
|
Finally got to race it today! I got into the twelves! 

[This message has been edited by hercimer01 (edited 05-26-2014).]
|
|
|
ignorant prodigy
|
APR 21, 04:22 PM
|
|
|
just read the whole post. worth the read, nicely done!
|
|

 |