Fiero body parts SE vs.GT (Page 1/1)
Fieromotion NOV 08, 12:39 PM
I have a 87 Fiero GT and I am looking for front end, front lid, rear engine lid and rear bumper. I`d like to make some modification to the 87 Fiero, however without doing it to the original parts. Living in Europe there is not too many possibilities to find them.
Now I have found 86 model with same kind of front end and the front lid looks like mine. 86 engine lid and rear bumper looks the same. The difference is that the roof is not GT style but short without the sail windows. Is this a 86 GT model? And are those parts I mentioned interchangeable? Have a photo of the 86 car but I don´t know how to attach it
Thanks
cartercarbaficionado NOV 08, 01:37 PM

quote
Originally posted by Fieromotion:

I have a 87 Fiero GT and I am looking for front end, front lid, rear engine lid and rear bumper. I`d like to make some modification to the 87 Fiero, however without doing it to the original parts. Living in Europe there is not too many possibilities to find them.
Now I have found 86 model with same kind of front end and the front lid looks like mine. 86 engine lid and rear bumper looks the same. The difference is that the roof is not GT style but short without the sail windows. Is this a 86 GT model? And are those parts I mentioned interchangeable? Have a photo of the 86 car but I don´t know how to attach it
Thanks


the 86 would be a 86 SE with the aero front but if its using a real deal gt decklid then its probably a modified roof. also you see that camera button at the bottom near options and show signature? use that
olejoedad NOV 08, 01:43 PM
The 86 notchback that you found is an SE model.

Even though the parts are very similar, they will not work with your GT ......MAYBE.

The differences lie in the belt line molding and the side marker light fitment.
The 86 SE has grooved side molding and marker lights, as well as the grooved molding on the top of the rear fascia.
The front fascia grooved molding piece in front of the side marker light is a separate piece, whereas on your GT it is molded as part of the fascia.

The metal plates attached to the front fenders and rear clip are also different between the two molding designs, however, they are riveted on and can be removed.

I don't know what mods you want to make, but this info should help you determine if the body parts from the 86 SE will work for your project.

Good luck!

Edit to add, the GT and SE use different rear decklids.
The GT has a different design (larger) vent that the SE.

[This message has been edited by olejoedad (edited 11-08-2025).]

Dennis LaGrua NOV 08, 01:57 PM
The rear clip (fenders), rear trunk lid, bumpers (Facia), and taillights on the Notchback and Fastback Fieros are different. They must be replaced with the same parts from fastback or Notchback cars. The front fenders, deck lid and doors on both models will interchange with minor modifications

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "