88 GT Lower Door Aero Trim Removal * Tips needed (Page 1/1)
Matt376 APR 23, 05:12 PM
Does anyone have any videos/photos of how to remove the lower aero trim from the doors of an 88GT? Tips, Tricks, Risks; What replacement parts should I have on hand? Clips that may need to be replaced??

Appreciate any assistance you can provide.

Thanks..
Vintage-Nut APR 23, 07:01 PM
I believe you're talking about the rocker extension to the door....

The service manual has a illustration in the body section on page 6J-3


I linked two PFF threads:

remove and install new rocker (aero) panels
https://www.fiero.nl/forum/...110502-2-095321.html

Rocker Panel Removal on GT
https://www.fiero.nl/forum/...110502-2-100009.html

PFF "GT Rocker Panel" Search
https://www.fierosearch.com...anel&Action=DoSearch


------------------
Original Owner of a Silver '88 GT
Under 'Production Refurbishment' @ 136k Miles

[This message has been edited by Vintage-Nut (edited 04-23-2025).]

Matt376 APR 23, 08:34 PM
Thanks!!
IMSA GT APR 23, 08:41 PM
Here's the Fiero Store link to the fasteners. They are the Lower Body Molding Clip Kits and you select the fender, door, or quarter when ordering. The photo I posted is for the door kit as you can tell by the part number.
https://www.fierostore.com/...rowse.aspx?d=308&p=1

[This message has been edited by IMSA GT (edited 04-23-2025).]

jelly2m8 APR 24, 02:20 AM
If your just removing the aero. panel, open the door, with a chisel pop the heads off the half dozen or so plastic rivets that's in the bottom and simply lift the panel up. Once that is off there is what I assume is a stainless steel mounting bracket that's also plastic riveted to the door panel.