 
     |
| Left Turn Signal/Brake light not working (Page 1/1) |
|
FieroRob94
|
MAY 18, 06:51 PM
|
|
I am having an issue with the left turn signal not working on my Fiero. If the running lights are off the signal works and blinks just fine, however when the running/headlights are on I can see the left indicator on the dash lit up very dim (without engaging the left signal). With the lights on once I try to engage the left turn signal the dim light on the dash disappears but no left signal/blinking.
The left brake light also does not light up when pressing the brakes. The bulb is not burnt, and was replaced with a new bulb, but still the same issue.
I have replaced the front left turn signal socket thinking it was a ground issue there, but I still the same symptoms. I do not know if it is a coincidence that both issues are happening on the left side.
Any help/insight is greatly appreciated. I am not too sure where the issue might be residing.[This message has been edited by FieroRob94 (edited 05-18-2019).]
|
|
|
|
Gall757
|
MAY 18, 08:51 PM
|
|
|
The side marker lights need to be functional for the front to work correctly. As for the brake light, make sure the spring loaded contacts in the socket are moving a bit.
|
|
|
|
FieroRob94
|
MAY 18, 10:10 PM
|
|
Thanks for the info! All four side marker lights are lighting up...do you think it might be some sort of issue with the sockets for the side marker lights? I am going to check those and see if I find anything strange.
| quote | Originally posted by Gall757:
The side marker lights need to be functional for the front to work correctly. As for the brake light, make sure the spring loaded contacts in the socket are moving a bit. |
|
|
|
|
|
theogre
|
MAY 18, 10:45 PM
|
|
|
|
|
87fiero2017
|
MAY 19, 07:27 AM
|
|
|
I'm having the same problem. Both signals are dim on dash and hazards don't work with running lights on
|
|
|
