Buying a fiero with no keys (Page 1/3)
Notglitchd FEB 04, 01:16 PM
Hello all looking to get a fiero as a project with a 2.5 4 speed going to do a 3800 swap or caddy 4.9 but the vehicle auto has no keys how hard would it be to get them from a metro detroit dealer?

I'll probably have to have a locksmith make a reverse impression (pretty sure that's what they call it

Thanks for the response if you have a cool idea for the project let me know
ltlfrari FEB 04, 03:28 PM
Fiero store has key blanks, $5.95 + shipping etc.
Deals probably doesn't know what a Fiero is LOL

No idea how hard or not it is to make new keys without the old ones, or the cost.

------------------
Anything I might say is probably worth what you paid for it, so treat it accordingly!

Dave

www.ltlfrari.com

Notorio FEB 04, 04:01 PM
Welcome to the forum! You can also look on eBay for full sets that come with brand new locks and keys for both doors and the deck lid (which are different) ...
thesameguy FEB 04, 04:29 PM
I don't know this, but I gotta believe a locksmith can make an actual key if you provide the lock cylinder. I've done that on numerous cars and no locksmith has ever complained. I've even dumped a pile of junkyard-sourced lock cylinders off and them make one full lock set with a common key before. It worked on my '87 Suburban, sure seems like it'd work on a Fiero!
FX FEB 04, 06:02 PM
..' If you go to a GM dealer with title/proof of ownership/numbers, they should be able to get you a key. I have done this...
Dennis LaGrua FEB 04, 07:27 PM
In the worse case new or used ignition and door cylinders are available. I would take the most economical route available.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Patrick FEB 04, 07:53 PM

I went through the available options five years ago.

Is it possible to get ignition keys for our old cars cut using the VIN ?
fierofool FEB 04, 08:41 PM
Before you get too far into it, be aware that the 84 was a bastard year in many ways, especially the electrics, and the hardest one to do any kind of engine up grade on.
vette7584 FEB 04, 09:58 PM
as for the ignition key, it doesnt get much cheaper than this, you get a new cylinder and key, easy to install as well. as fo the doors and trunk lid, thats a different story..

https://www.ebay.com/itm/Ne...oYAAOSwCVtb4zEh:rk:1 f:0
IXSLR8 FEB 05, 02:54 AM
Just take the right hand door lock (passenger side) out of the car door and take it to a standard locksmith. They will look up the number on the lock cylinder housing and cut you a new key that should fit your ignition and door locks. Costs about $7.