 
     |
| Reasonably priced seat covers. (Page 1/1) |
|
Bakeys
|
OCT 17, 07:32 AM
|
|
OK, so I bought this Fiero.
It has mechanical issues, which I'm working through.
Previous owner was a butcher, shall we say, sooooo lots of work to be done and mysteries to figure out.
So cosmetics is my last focus. I want this little gem to be running decent before I start to spend fund$ on the finer points.
In the meantime, does ANYONE offer a small size seat cover?
I picked up a cheap $30 set at Wally and they're huge. Not happening.
So for now, I'd like to find some pull-over covers. There's a small tear in the drivers side that may be bleeding foam if I don't get something over it soon.
Any suggestions?
|
|
|
|
tshark
|
OCT 17, 08:09 AM
|
|
|
There is a set in the mall. Actual seat covers, though.
|
|
|
|
jaskispyder
|
OCT 17, 08:15 AM
|
|
Ebay and just checking various stores for something that is narrow. They are out there. If you look on ebay, look for older covers that people have had for a while, as they may be narrower.
I suggest getting a set of used covers and replace the material. It isn't hard. www.mrmikes.com has a write-up on how to change the cover. You just need some hog rings and pliers. Pretty easy, really. I installed a set of Mr. Mikes covers in one of my Fieros.
|
|
|
|
omaps
|
JUL 04, 05:52 PM
|
|
I ordered a set from Costco made by Coverking. The quickest way to put them on was to pop the seats out first (4 x 13mm nuts) stick the chair on a table and then you're not on your knees fighting with them.
The fit is pretty good, there was a little pocket of extra fabric close to where the seat belt does up so it's out of sight once the seats are back in. Put both on in about an hour. I'd prefer to get MrMikes but can't afford them.
|
|
|
|
Dennis LaGrua
|
JUL 08, 03:27 PM
|
|
Try these on eBay. Those are the cheapest.
Cover King Seat Covers for Fiero------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
87GT2M6
|
JUL 09, 10:52 AM
|
|
|
|
Patrick
|
JUL 09, 02:32 PM
|
|
| quote | Originally posted by Bakeys:
Any suggestions?
|
|
Just one... don't attempt to link to images posted at Facebook.  It doesn't work.
If you're running Windows, PIP FTW.
|
|
|
|