We're having a baby! And you know what that means.. Old projects need to find new homes. (VIDEOS LINKED BELOW)
Extra Parts in Bundle:
Driving:
https://youtu.be/zzkAZNbHXl8Driving:
https://youtu.be/jaiRBIvMi24Quick Walkaround:
https://youtu.be/8XpomafKbZIQuick Walkaround:
https://youtu.be/qsY4EKVVJLsI've owned this car and built it for around 10 years, she's sadly sat in the garage for the past 3 while I switched gears to build a house, (Vintage Bluebird bus tiny home). Now my wife is expecting and its time to sell some projects. My Fiero is one.
-Chassis: It's a '87 GT with an interior, I stripped the car to the bare frame and POR15'd it, and also sprayed the entire interior with Lizard Skin sound deadening spray. All new SS brake lines, Trans lines.. Grand AM brake swap front and rear, new Master etc. Every suspension bushing was replaced with Poly, which rides well and doesn't squeak. All new ball joints, tie rods and KYB shocks. Has ST Lowering springs, that give it a good 3in drop. Again, rides firm and tight but not harsh. Shaved the firewall, added new heat insulation, cut out front tub, added massive radiator, new heater core, all controls works too.
-Interior: All Tan, everything is in great condition, just musty.. Built a seamless A-pillar gauge pod, and 3 gauge pod over the radio. All gauges are new and work great. The Stereo is fantastic, with 4 new Kicker speakers, and thick sound deadening mat in the doors and floor. Upgraded mirror with compass, and power mirrors and windows.
-Exterior: Needs paint, never got around to it. Have a fiberglass aero bumper that was never installed, hood and decklid need to be cut and are not installed etc.. All parts come with the car and more!
-Engine: 70k Series 2 L67 beautiful on inside, only ran synthetic. Has ARP Head studs, a ST3 Camshaft (Sounds nasty) and LS7 Lifters. Has a doubler roller chain, ZZP Oil pressure booster. 80lb Fuel injectors, custom fuel rail, upgraded fuel pump, a returnless fuel system, and all SS AN fuel lines and fittings. Trans is a 4t65-HD with 20k miles, with new filter, and ZZP shift kit. Braided SS lines too.
-Turbo is a Precision 6776 (67mm) it spools great only ran on 7psi. Have braided SS lines going to it, ZZP Power log manifolds, and a Turbonetics wastegate. Runs premium but built for e85. Have a Water to air intercooler, installed but not functional.
-Bottomline: Car wasn't finished when parked, and has been parked for 3 years. I have about $12k into it, and it comes with a couple of grand is misc Fiero parts from my collection. Whether you want to use it for a parts car, or finish it you're getting a massive heads start but it is NOT Finished, NOT ready to rip. I drained the oil and fuel recently, started right up. Will drive onto a trailer, Whitmore Lake, MI Asking $4500 for EVERYTHING, Clean title too, and bring a trailer for the car and all extra parts, I have ALOT, after owning multiple Fieros lol. I will link Youtube videos of it running, and my build thread... Please be patient!...
Build thread in Signature...
VIDEOS:
https://youtu.be/ZtPszw8wq5Yhttps://www.youtube.com/watch?v=xbY0eQCaMAE(Thanks everyone who helped build this)
https://www.fiero.nl/forum/Forum1/HTML/096641.html------------------
1987 Fiero GTX 3800 Turbo... My Build, ST3 Cam, Lowered, Wheels, and pics enjoy!
https://www.fiero.nl/forum/Forum1/HTML/089483.html[This message has been edited by IanT720 (edited 04-14-2023).]
.. Guy is coming today hopefully... Otherwise BUMP!
