Now for my fully bolted in and installed 1994 camaro dash. Overall I'm happy I did it. Deffenitly looks better than the old dash and I got it to take up only the same amount of room.
Thankyou I can't find any decent pictures online but I want to try and use a dodge stratus R/T center console for the front and middle then make a sub enclosure for a deep 10" for the rear half and computer cover
[This message has been edited by johnlp1994 (edited 01-20-2014).]
Thankyou I can't find any decent pictures online but I want to try and use a dodge stratus R/T center console for the front and middle then make a sub enclosure for a deep 10" for the rear half and computer cover
Thank you but I'm looking at using a 2001, I haven't seen one for awhile but If I remember correctly it looks a bit different than that one as well as I'm going to be using a manual surround vs the auto
[I want to pull some ideas off of the center console at least, like running the sides down from the dash in the front and where the ash tray and 12V is. Here's the pictures I could find. Keep in mind this is still purely thought process right now, I haven't been able to do any measuring. I'll know for sure what center console stricter I'm going to use in a week or 2 because I'm going to search through the junkyard and find all my possibilities
Nope....there was a 2001 R/T coupe on E-Bay for sale.Just uploaded from there and posted here for you. P.S. Don't forget that the Mitsubishi Eclipse from then has the same interior.
[This message has been edited by fierogtlt1 (edited 01-20-2014).]
Nope....there was a 2001 R/T coupe on E-Bay for sale.Just uploaded from there and posted here for you. P.S. Don't forget that the Mitsubishi Eclipse from then has the same interior.
Can't believe I missed this thread! Love a good build thread with lots of pics!
I used to have an 01 Stratus R/T coupe and I loved that interior... exactly the same as a 3rd generation Eclipse for all intents and purposes...
Eclipse
Stratus
Although the Mitsu doesn't have the stupid 1.5 DIN radio opening that Chrysler put in everything...
Thank you, its nice to hear from another person in the ice cold state of mn I used to hang out with 2 guys that had a eclipse and stratus and at least IMO the stratus looks much better with that interior
My friends make fun of me for owning one, but I loved that car... I was sad when I had to trade it in because of financial issues, but kinda glad I got rid of it now though, as they turned out to be rust buckets...
I bought a B&M short shifter for it. It got hot in the summer... ever see Raiders of the Lost Ark? Remember when the bad guy picks up the pendant out of the fire in the bar? Yeah... B&M logo in the palm.
[This message has been edited by carbon (edited 01-22-2014).]
My friends make fun of me for owning one, but I loved that car... I was sad when I had to trade it in because of financial issues, but kinda glad I got rid of it now though, as they turned out to be rust buckets...
I bought a B&M short shifter for it. It got hot in the summer... ever see Raiders of the Lost Ark? Remember when the bad guy picks up the pendant out of the fire in the bar? Yeah... B&M logo in the palm.
I know that one, I have a lime green cavalier for my dd I had wanted one for awhile the one my friend had was a built 3.0 with a shorthrow stage 2 clutch and that thing moved I haven't heard of that one I'm going to have to look it up after work
I'm not sure how long it take for a thread to go to archives but to be safe BUMP!!! no updates as of now, I've stepped out of the garage for awhile and I've been working on advanced ecigs. RBA RDA mech mods and VV/VW mods so I can start working at an ecig shop hopefully soon
Thats kinda high priced. Take a look at this and this one anotherSmart PKE
quote
Originally posted by seajai:
Good to see another Fiero guy on the North end of town. Lemee know if you ever need any help, I'm just a few miles south of you. If you ever want to theft proof your car, check out this push button start system: http://www.advancedkeys.com/Prod_AK104B.html Put one in my car last year and its been trouble free. It completely eliminates a need for a key.
[This message has been edited by dematrix86gt (edited 02-26-2014).]
Nothing as of late.. but thanks to the warm weather and lots of YouTube fieros the bug is full throttle once again I've got in uncovered from its pile and working options and methods for finishing the dash and getting it running so I can drive it this year
[This message has been edited by johnlp1994 (edited 03-14-2014).]
Bump! Nothing mentionable as of late. Unfortunately I've hit a financial rut and nothing will be happening for awhile but on the good side the fiero is here to stay so I am not falling off the wagon any time soon
Would someone be able to help me find the wiring diagram for the 94 camaro dash specific? I know there are a few but I can't seem to find them anywhere. I'm going to do the small work while I'm stuck so figured I have a spare harness, let's get my dash "done" please and thank you
drum roll please!!!! finally the time has come for picture worthy updates first, i fixed the wires i nicked while cutting the dash structure
then started wiring in the gauge cluster
sorry for the not so great pictures from here on out, had to take 2 of the gauge cluster lit up, have it as far as i can test it for now and so far it looks good
hooked up the radio for alittle fun :3
got the center console put back in
and almost have all the passenger side trim put back on
now for the updates of the night got the head light switch wired in with the fiero dimmer
than trimmed the passenger trim to fit properly
then trimmed the glove box to get it on. i know i defeated the purpose of it but sometime i will box it back off and try to fix that corner.. but its on
I can now say that the dash is done. Everything OEM is on and/or wired and working besides the defrost. All I have left is the dash pad. I will be doing a HVAC delete and putting some mechanical gauges in their place. I will be taking a ton of pictures and a full walk around video. Until than I will leave you all with a video or the mountain I climbed yesterday http://youtu.be/jYy7hDyqook
Almost forgot to give thanks, I'm sorry I don't have all the names I've read quite a few threads on camaro dash swaps and want to thank everyone who did this and documented it for people that wanted to do the swap, everyone that has helped in the little question threads throughout this swap and big thank you to jscott for making the maps for wireing. Without this forum I would have never attempted something of this magnitude. I'm still going to keep this thread going for everything I do to the car, don't forget the dash may be done but I still have the center console and door panels to do thank you so much everyone!!!
Well its been quite some time since I've had an update, I had to leave it parked at my parents for now and turn my attention to a few other things since I've moved cross state, I'm hoping that I can work out a place to be able to work on it again soon though sorry guys
here's pictures of everything I trimmed on the dash and steering column mount
a little teaser for what I'm doing for my new front speakers for a good while
finally the time has come for picture worthy updates 
thank you so much everyone!!! 
