I am wanting to buy a set of the C4 corvette 12 inch caliper adapters. Would like it to have the brackets and the concentric rings. And if anyone has the Caliper brackets then give me a price on those too. Thanks Daniel
IP: Logged
03:31 AM
PFF
System Bot
fieroluv Member
Posts: 1951 From: Ft Wayne, IN USA Registered: Jul 2002
send PFF member 'sluppy123' a PM and see if he has any sets left.
He made a recent run for some of us in Texas, and may have had a few leftover sets.
Nice Pieces + rings. Reasonable prices, and a reliable individual. These were only for the '88, BTW. He may have some for the '84-'87's... just give him a PM!
IP: Logged
11:54 AM
Quad GT Member
Posts: 1613 From: Toronto, Ontario, Canada Registered: Aug 2002
Hey everyone, Unfortunately cheetah only did that group run of 10 or so sets of brackets and rings, so that lets him out. And I already contacted sluppy123 and he only does the 88 brackets and he wont make anymore of the 84-87 brackets and he doesnt have any left. So i guess my options are not there unless more somebody wants to get rid of a set there sitting on or there is another group run made up. Well now i know why something was telling me to buy a set when there were being made because i might not be able to get a set later. Well anybody else got any ideas. Thanks for the help and a + to those. Thanks Daniel
IP: Logged
03:26 AM
fieroluv Member
Posts: 1951 From: Ft Wayne, IN USA Registered: Jul 2002
Well, I don't know if you have seen this thread or not, but there are cad drawings of the brackets and rings that you should be able to take into the machine shop and have them cut out for you. I have no idea what that would cost though.
IP: Logged
08:28 AM
daniel87fierogt Member
Posts: 1793 From: Northern California Registered: Oct 2003
Fieroluv, I did actually see that thread and the dimensions and im thinking that i might just have to go down to the machine shop and have them make me a set. Cause it doesnt look like anyone wants to get rid of theres. Thanks
IP: Logged
05:53 PM
Dec 30th, 2006
fiero_silva Member
Posts: 1493 From: Winnipeg, Manitoba, Canada Registered: Jun 2003
Fieroluv, I did actually see that thread and the dimensions and im thinking that i might just have to go down to the machine shop and have them make me a set. Cause it doesnt look like anyone wants to get rid of theres. Thanks
I might make a run of them at work in a short while... This is somthing I'd like to do for my car, so making a couple more set's at the same time wouldn't be a big deal... Give me a week or so to figgure it out, things at work at super crazy right now with renovations and the buisness growing like crazy.... Today is the first day I've been home from work before 1am in a month
IP: Logged
09:19 PM
Fierofreak00 Member
Posts: 4221 From: Martville, NY USA Registered: Jun 2001
I might make a run of them at work in a short while... This is somthing I'd like to do for my car, so making a couple more set's at the same time wouldn't be a big deal... Give me a week or so to figgure it out, things at work at super crazy right now with renovations and the buisness growing like crazy.... Today is the first day I've been home from work before 1am in a month
PM sent! -Jason
IP: Logged
11:43 PM
Dec 31st, 2006
wiccantoy Member
Posts: 3372 From: northwales , pa / Williamstown nj Registered: Mar 2002
Well the more orders I get the cheaper the materials will be. Im trying to get the price around $140 for everything may be even cheaper. This will include Aluminum rings also. If interested please PM me.
I work in Avionics for Bombardier so making these kind of things is a sinche for me.
IP: Logged
07:53 PM
Jan 2nd, 2007
Quad GT Member
Posts: 1613 From: Toronto, Ontario, Canada Registered: Aug 2002
man if I didn't have to buy a welder, I would be all over that. It'll be a couple months before I can buy them. So I'm probably outa luck, as usual. LOL