Ok, yes i did a search and yes i know where to get the panels but i dont want solid red lights. does anyone know where to get the 355 style lights with the reverse light in the center.....and preferably ones that dont screw in from the outside? i looked at my neighbors real 355 and the lights are perfect! but.....on ebay they are about 700 dollars so any ideas?
aside from the pisa panel and the kahines panel anyone else make these?
IP: Logged
02:04 AM
PFF
System Bot
IMSA GT Member
Posts: 10696 From: California Registered: Aug 2007
PISA sells the lights with the clear centers for $180.00 for 4. The issue is that they ONLY sell them with the clear centers. You still would have to find solid red ones if you needed them. Also they do screw on from the outside but I have not seen a vendor on here that has the 308 style lights that are authentic.
[This message has been edited by IMSA GT (edited 09-01-2010).]
IP: Logged
02:41 AM
shawnk Member
Posts: 968 From: San Francisco, California, USA Registered: Mar 2008
well the 308 style is not what i want i like the 355 style which are rounded and a bit longer i am aiming to have the lights poke out of the panel by maybe an inch
IP: Logged
02:59 AM
shawnk Member
Posts: 968 From: San Francisco, California, USA Registered: Mar 2008
like this. i looked at the neighbors car the lights are round with a curved face and even shaped top to bottom the panel on the 355 is angled so the lights look longer at the top. i like then look of the lights slightly popped out
while i was googling something else i came across this which happens to be a pff post scroll down to the post by jmex....thats exactly what i was thinking and used my light choice as well https://www.fiero.nl/forum/Forum4/HTML/052138.html
IP: Logged
01:20 AM
nosaint Member
Posts: 293 From: Moose Jaw, SK Canada Registered: Aug 2009
Ohhh.... the suffering one has to go through with Fiero ownership...
Looking for lamps like this? (genuine Ferrari)
Reminds me of the kahines panel. Its a one piece VS the PISA which I believe is a 2 piece. You could easily do one of those and add the carbon fiber overlay... http://www.kahines.com/
Ken kahines sells 2 versions of his panel. One has the lights attaching from the outside. The Gen 2 version though attach from the inside. Hope this helps.
[This message has been edited by Fieroseverywhere (edited 09-02-2010).]
IP: Logged
02:20 PM
nosaint Member
Posts: 293 From: Moose Jaw, SK Canada Registered: Aug 2009
Okay, it's time to let one of the cats out of the bag. I have been tinkering with a tail light mod but haven't had time to really do any thing with it. While I had trunk seals in the drying rack today, I worked a little more on my mod. Granted mine use a solid red lens but it is a full 5-14" lens.
I wanted the look of a Ferrari/Corvette light crossed with the stock GT lenses so I came up with these. Using a 5-1/4" holesaw I cut through a stock set of inner lens prisms. I gutted most of the stock socket structure.
I still need to mill the lens holder for the back side of the painted lens.
I shot the colored part of the lens with Krylon Satin Black Plastic paint.
------------------ Is your Fastback GT's trunk seal shot? My replacement GT trunk seals are now in production and shipping. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project
[This message has been edited by infinitewill (edited 09-02-2010).]
IP: Logged
03:36 PM
fierosound Member
Posts: 15252 From: Calgary, Canada Registered: Nov 1999
I am really liking these and thinking of inserting under the stock covers as i have a new set. Anyone seen these for a better price perhaps? Look great and would give the GT fiero a much more modern look.
Okay, it's time to let one of the cats out of the bag. I have been tinkering with a tail light mod but haven't had time to really do any thing with it. While I had trunk seals in the drying rack today, I worked a little more on my mod. Granted mine use a solid red lens but it is a full 5-14" lens.
I wanted the look of a Ferrari/Corvette light crossed with the stock GT lenses so I came up with these. Using a 5-1/4" holesaw I cut through a stock set of inner lens prisms. I gutted most of the stock socket structure.
BEST MODDED GT LIGHTS I'VE SEEN SO FAR!! think these are the best so far that Ive seen for the GT!
I still need to mill the lens holder for the back side of the painted lens.
I shot the colored part of the lens with Krylon Satin Black Plastic paint.
Perhaps another idea,Chevy Cobalt tail lights have an angled lens,can be turned to an angle you can use. The lens is all red of course. One day I hope to put a pair on each side & the backup light in the middle as the turn signal, w/yellow bulb, leave the clear center lens as is.
The gentleman doing the custom inset of red lights in the GT's is cool.
These look like they would be super easy to mod! Only down side is the 24V system
------------------ Is your Fastback GT's trunk seal shot? My Gen III replacement GT trunk seals with solid molded corners are now in production. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project
IP: Logged
08:08 AM
GADJet Member
Posts: 1466 From: Star City, AR, USA Registered: Sep 2010
You'll need the 355 lights to get the look you want and go ahead and get the third brake light too, it fits perfectly under the roof ledge. I used the original taillights to house them so they still bolt up like stock.
IP: Logged
08:55 PM
PFF
System Bot
Feb 7th, 2012
Australian Member
Posts: 4701 From: Sydney Australia Registered: Sep 2004
h6h2k1g~~60_12.JPG)
