OK... First off I am going to look at this with some sense... (for a change!!) I am looking at this being a 5 year plan!!! <-------- EVERYONE REMEMBER THIS!! I have decided after looking at "SmoothGT" up on block's for the last 1 1/2 month's... waiting for $$$$ to fall from these freaking tree's for another engine. Waiting for paint! Waiting for this, Waiting for that! Well, Time to make some doing something I can and help you people! I got to looking through some of my drawing's that I have done of different Body Mod's AND Interior Mod's....
Now when I say Interior mod's I mean a new dash, door panel's console.. THE WHOLE THING! and I counted and there 7 thing's that will be done by me that no-one else here does! Oh, those 7 I mentioned.. Are for just the interior!! I am going to start with the interior with a few small thing's because I am not through with the mock up of it yet.... It is about 60%.
Now...
The EXTERIOR!! (disclaimer: No Fascia's yet!) FIRST ITEM that will be done is one of 4 different design's that will be done! It will also have other 'matching' part's that will go with it OR can be done a piece at a time! O think it is going to be cool! What I am talking about is one of the FIRST ITEM's that will be OFFERED is: New designed doorskin's!! and Coupe rocker's!! The first design will also have a new designed and MATCHING set of Ground Effect's (or whatever you want to call them!)<--- Rocker's... The Ground effect's will match the doorskin's... and then later I will offer matching sidescoop's.... Like I said I will offer these PER PIECE.... I know how hard $$$ is to come by that's why I am going to do that! and saying that I will also be reasonable on price!
Now the other thing's that will be offered will be announced after a few set's of whatever the item is has been done and checked and re-checked for fit! I will continue to do this until the mold's are how I want them!!
Now... What I want from my fellow member's is INPUT! I do not have Photoshop so I can't design and play like some... I get a pencil and paper...
So, what I am saying is get busy and post WHAT YOU WANT HERE!! START with the doorskin's and Ground Effect's!!
Ok, this is my idae on the door skins... I was gonna keep to myself on this 1 but who know how long it will be till i get the money (and time) to start fiberglassing... So here it is...
I forgot to add that I will also have "Rocker Panel Scoop's" like Archie's(I mean one piece) the bottom and the 1/4 scoop will be one piece.... I will be a different type scoop and rocker!
Fender's with a "Trans Am" type scoop built in....
Come on guys... are we only ones that like this idea ?
(btw, steve i never got another PM )
~Tim
Be VERY PATIENT GRASSHOPPER!!!
It is the weekend and people are outside or doing other thing's...
Like I said before... This is a long term plan..
I am going to be adding other item's IN THIS THREAD!! With that being said Tim... This thread will be added to(bumped) often I am sure as soon as i get it 'actually' going! Some of these thing's I have planned, especially for the Coupe's since they are the one's that usually get left out when aftermarket is concerned! First thing will be either/or the doorskin's with matching rocker's... 4 different design's of rocker's JUST for the Coupe's! Two of the design's have a matching quarter scoop(1 in, 1 out) with the matching rocker's! As soon as I can get ahold of a Coupe Nose then I am going to make a Matching nose that will 'flow' with the different designed set's. Like I said before, I AM going to sell ALL the part's seperatly....
Anyway's, Those are just a few of the part's that will be developed... So, Stay patient, This is going to be a long, but fun and exciting ride here!! Add this one to your Favorite's!! j/k! The link to this thread is in my sig. and my NEW email for all this 'glass business is in there too! See.... Stay Patient.. I AM!
IP: Logged
02:24 PM
Fie Ro Member
Posts: 3735 From: Soest, The Netherlands Registered: Sep 2001
We'll STILL BE WAITING and waiting and waiting and waiting and waiting and waiting and waiting...........
No one care's...
anyway...
I sat down today and did a little drawing's of one piece rocker scoop's..... ala. ARCHIE'S (<--type) and I think these are going to be really good!! One has the quarter scoop and a scoop in the rocker (front and rear/under the quarter scoop...)
Stay tuned.... I have traded different stuff to 4 member's of PFF for stock panel's-quarter panel's-fender's-rocker panel's for the Coupe-doorskin's.... I am going to make a mold of the 'stock' part's(OEM) and then make the part's... Then modify them... make another mold of THAT design.... So, I will then have what..?? Mold's for STOCK replacement's 5-10 year's from now... AND a mold for ONE design.... Then I will make ANOTHER 'stock' part... modify it for a second design... and make ANOTHER mold for number TWO... That's three mold's ....for EACH OEM part!! Well, Not the fascia's and decklid/hood for now!! maybe in a few year's I will jump on the LARGER pem part's inculding modified rear clip's.. <--- IF there's enough interest... Does'nt seem to be much interest in my plan's anyway...
I know everyone is just sitting back and waiting for some result's.. NOT talk!
Stay Tuned!! Be Patient and feel free to add ANY idea's or your want's!!
Steve NAFAL Custom's....
ps. I am also looking into making the rocker panel's for the new GTO's... You know.. HIT the aftermarket early, I make break even...
