Hello. I recently did an egr delete on my '86 GT. The idle is much better now but still not right. I went around checking all my vacuum connections again and noticed the hose connected to the front of the egr solenoid is not connected to anything and is not even shown on the vac diagrams?? Is this just there to vent or? What am I missing here?

------------------
'86- GT-4spd- Stock for now.....
88-GT 3800sc II- sold
87-GT 3400 Turbo- sold
86-GT 3800sc II - sold
87-GT stock- sold

I believe its a vent. Sometimes a piece of foam may be covering it.

Spoon

------------------
"Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne." - Kurt Vonnegut

quote Originally posted by Spoon: I believe its a vent. Sometimes a piece of foam may be covering it. Spoon

Oh ok.. I notice a hose dangling off the end and thought it maybe connected somewhere..
Thanks

It was originally hooked up to a tube that went over to the air cleaner. Picking up air there is almost like a vent, but perhaps a slight vacuum. I have often wondered if you are more apt to get a code 32 if the tube is missing.

quote Originally posted by Gall757: It was originally hooked up to a tube that went over to the air cleaner. Picking up air there is almost like a vent, but perhaps a slight vacuum. I have often wondered if you are more apt to get a code 32 if the tube is missing.

Yeah,, I did finally see that wondering where the tube from the air cleaner ended up. Guess I'll reconnect it with new hose since the old hose was shot any how...
Thanks...

------------------
'86- GT-4spd- Stock for now.....
88-GT 3800sc II- sold
87-GT 3400 Turbo- sold
86-GT 3800sc II - sold
87-GT stock- sold