Info needed like what donor cars to look for in the salvage yards. and what trans configurations or set-ups are needed. Also ecm info is needed also any custom mounts or brackets. thanks for all of the duke info but its time to put this duke down. thanks for the info in advance. -gary-

------------------

------ MY FLEET-----
.....1984 2m4 se-305 v8 swap in progress....
.....1987 2m4 base duke all original.....
.....1985 2m6 gt. stage 3 chip, no cat.....
.....1993 Jeep grand cherokee v8.....
.....1986 chevy p/u fullsize 4.3.....

buick regal 97-03
grand prix 97-03
bonneville 96-04
impala ss 04
monte carlo ss 04

I'd stick with the current tranny's of the car or go with the 5spd which ever, people will always dislike the 5spd I don't mind it one bit can go either OBD1 OBD II, OBD II has better diagnostic ability. As for mounts I used polly all around they set in and I don't get a peep from them

------------------

thanks key, your always coming through for me, is there a 3800sc mounting kit that i can buy? sorry but i know i want a 3800sc but i don't know anything about it. Maybe a complete material list would be cool Less getting the motor of course. thanks again -gary-

quote Originally posted by freshfiero: Maybe a complete material list would be cool

See if this helps any: http://www.naskie18.com/3800SCman.xls

------------------
Nick www.naskie18.com AIM: Naskie182010

www.fastfieros.com
and my list on Yahoo!! 3800v6superchargedfieros on yahoo groups
theres also the west coast fiero guys too....
S.Williams

------------------
1988 Fiero Formula T-tops
CJB 143 of 1252 "factory T-top cars"