 
     |
| 3800 swap harnesses (Page 5/20) |
|
NeoNot
|
NOV 24, 02:01 PM
|
|
Dan,
You might want to check out Radio Shack. They carry a little pin pull for molex connectors and various other connectors that allow you to remove the pins from a wiring harness with no effort. The nice thing about using this little tool is saving the tiny latch tabs that break so easy!!!.
If memory serves me right they are roughly $10.
By the way thanks for the write up on the harness. It may come in handy in the near future if I can decide on what motor I am going to use.
|
|
|
|
FIEROFLYER
|
NOV 25, 06:28 PM
|
|
I have a small dental pick that works just fine for removing pins.
The C500 is the one over by the battery on 85 and up Fieros and bolted to the fire wall on the 84 models. It has three parts this is the three parts together.
loosen the nut joining the parts together with a 1/4" socket while gently pulling it apart and you get the two portions off the base.
bend back the two clips on the side and pull the portion that feeds off ot the tail lights from the other part.
Then you have just the engine portion of the C500 which is what is needed for making the swap harness. Then once the harness is done and installed onto the engine you just reassemble the C500 and C203 and the wiring portion of the swap is done other then adding in a few good grounds and connecting the battery up to the starter.
|
|
|
|
FIEROFLYER
|
NOV 26, 09:35 AM
|
|
If there is any thing else I can post a picture of or questions to answer feel free to ask.
Now that the harness is complete Chris did you still want to buy it or is there some one else that would like to purchase this harness. Chris has first dibs then if he does not want it I will advertize the harness in the mall where payment will go to PFF not me. Dan------------------
Signature compliments of F-I-E-R-O
2003 3800SC series II powered
www.photosled.com/showgallery.php/cat/631
www.photosled.com/showgallery/cat/1583
|
|
|
Misery
|
NOV 26, 08:56 PM
|
|
If Chris doesn't want it...I'm in !!!
Dan you have a PM!!
|
|
|
|
FIEROFLYER
|
NOV 27, 08:58 PM
|
|
|
Seeing as I have not heard back from Chris I guess Misery the harness is yours, make a donation to PFF for $400 US and once I am contacted by PFF to let me know you have made the donation I will ship the harness along with the matching 98 GTP PCM to you. Dan
|
|
|
|
MstangsBware
|
NOV 28, 06:02 PM
|
|
| quote | Originally posted by FIEROFLYER:
Seeing as I have not heard back from Chris I guess Misery the harness is yours, make a donation to PFF for $400 US and once I am contacted by PFF to let me know you have made the donation I will ship the harness along with the matching 98 GTP PCM to you. Dan |
|
If Misery passes on it then I will take it for a upcoming project. Just let me know.
|
|
|
|
josef644
|
NOV 28, 06:34 PM
|
|
Well done Dan, Very Well Done.
Do you make these for the Cadillac 4.9's swaps also?
Thanks
Joe Crawford
Texas
|
|
|
|
FIEROFLYER
|
NOV 28, 06:34 PM
|
|
Turns out Chris does want it so I will now start on another for Misery. Any one need one for an 84 as I have one manual tranny and one auto tranny swap harness, one from an 84 I was going to do a swap on for myself and the other from a person who changed his mind after ordering the harness. Also have one for an 85 up with the auto tranny that I made for a customer where I was confused about what he wanted and ended up building him a manual tranny harness. That is what happens when you do over 40 harnesses in just a few months you get a little confused. Dan
 ------------------
Signature compliments of F-I-E-R-O
2003 3800SC series II powered
www.photosled.com/showgallery.php/cat/631
www.photosled.com/showgallery/cat/1583
|
|
|
|
Fierostarvin
|
NOV 28, 07:22 PM
|
|
|
Dan, Can you tell me about the 84 auto harness? What's included, how much. thanks Jeff
|
|
|
|
FIEROFLYER
|
NOV 28, 10:25 PM
|
|
|
The 84 auto harness is built for the PCM and ignition module to be mounted in the old battery location, the alternator in the stock location or low on the trunk side and has A/C wired into the harness. The harness has the C203 and C500 already on it so you just would need to install the harness on your engine and connect the C203 and C500 then run a few extra wires to your fuse panel as the 84's do not have enough sources of ignition to work with in the harness already. It is all wired for a 98 GTP PCM which I can supply with the harness, the emissions wiring is in the harness as well but you can just not connect them if yu do not want all the emissions working. I would like $400 for the harness and its matching PCM. Dan
|
|
|
