PFF - Pennock's Fiero Forum, PDA Edition

3800 swap harnesses (Page 19/20)

Hawaiian Brian

SEP 11, 12:23 AM

So Dan, are you still making harnesses ? I'm picking up a running 02 GTP and want to swap it into my 86 5spd Gt.

Thanks

B

mental floss

SEP 11, 03:17 PM

Thanks for the thread and tutorial.

Eglaore

DEC 20, 11:42 AM

So maybe I missed it but I'm having a little trouble being sure where the 4 wires from the fuel pump relay go, and the plug from the hd gtp trans with the 2 12guage wires/ not sure where all the wires from this plug go. And one last thing, Fieroflyer you said there is one wire for cruise control that comes from the pcm that just gets grounded, do you know what pin it is? I'm using pcm and wiring harness from 98 gtp and the trans is from 98 gtp to. Thank you.

Oh, does anyone have a link to a diagram for the resistor for the speedo?

[This message has been edited by Eglaore (edited 12-20-2014).]

Eglaore

DEC 21, 11:07 AM

Ok so I figured out the fuel pump relay. The trans plug I was talking about I think I have most the wirse figured out. the two big wires I was talking about were actually 10guage. The yellow goes to c500 I think and the purple one goes to the starter, It looks like it gets grounded on the starter. Is that correct? There is still 3 wires on that trans plug that I don't have a spot to put: Orange/blk which is pin A, Green which is pin C and Black which is pin D. I'm guessing black gets grounded but not sure. Would appreciate any feedback. Thanks

Spiders1

JAN 25, 10:02 AM

Thank you for sending the pieces I needed to finish up my swap Dan. Greatly appreciated.

------------------
86 GT 3.8 SC/ 5 speed Getrag swap in progress

05 Mustang GT Supercharged tuned down from
560 to 530 RWHP

92 Stealth twin turbo JDM engine swap
Upgrades in the works...turbos, injectors
and computer

FIEROFLYER

FEB 04, 07:35 PM

Is better to ask me questions by PM as I do not check this as often as I should, on the tranny plug pin B orange goes to the blue wire from C500 for reverse lights and pin F to the green wire from C500 reverse lights and yes black is ground for the selector switch that tells the PCM which gear is selected

Spiders1

FEB 13, 12:23 AM

Flyer did my harness. Fired right up, plug and play. Thanks again.

Adjustso3

FEB 20, 10:54 PM

I would just like to clear up a few things about Fieroflyer. I have been sending him emails with tons of questions and he might not get back to you right away but does within a couple days. He has been very patient with me in reguards to my newbie questions and always gives me the time of day to answer them. Some of my questions have nothing to do with what he builds. I would recommend everyone to ask him for his email address instead of sending a PM over here. It's not my place to post his email addy so I would just ask him through a PM. Once again Dan, thanks for your time and I'm looking forward to doing business with you.

Lou and Blue

MAR 12, 08:42 PM

I am about to send my harness to Dan. I hear he is the best. He has helped me so much so far via email. Great guy.

------------------
===Always trying to find time to work on cars===
Louis Duet
Baldwin, Long Island, NY
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Blue" <= '85 Fiero GT
Stock V6---Stock everything. Trying to keep it 'mostly' that way. But I just got the 3800sc to swap into it!
~~~~~~~~~~~~~~~~~~~~~
"Boo" <= '81 Delorean DMC-12
VIN #5835
Stock PRV engine
Peugot 604 Intake manifold
Exhaust headers
Anti-3rd brake light

Lou6t4gto

OCT 23, 01:53 PM

he has helped more people than you even know. be patient, he will get back to you. no need to Flame people