 
     |
| 3800 swap harnesses (Page 17/20) |
|
85SEJAX
|
JUN 03, 11:57 AM
|
|
| quote | Originally posted by dobie1:
I am really sorry to have to do this to anyone but , Caution to anyone thinking of dealling with Dan Mcllmoyle "FIEROFLYER"
I sent him $550 dollars along with my 3800 wiring harness and computer over 4 months ago. He told me it would be a couple weeks to do the new harness up and reprogram the computer.
He has moved will not answer emails and the phone number he gave me is disconneted. This amounts ot fraud over $1000 dollars in Canada |
|
Although Dan told you a couple of weeks and you still have not recieved anything I wouldn't get too upset just yet. He told me the same thing back in January. I didn't get it until late april but I did get it. He does not communicate very well or give status updates and I know that he just moved as well. He was extremely backed up with orders due to people just sending him harnesses and money orders without even talking to him first. Try getting ahold of him on (I think this is it) gtfieros.com you might get better results.
|
|
|
|
Bfisher31286
|
SEP 01, 10:39 PM
|
|
|
There are two resistors wired into the stock harness (one a few feet from PCM connection, the other near the ICM). Do either of these have to be kept?
|
|
|
|
FastFieros
|
SEP 01, 11:37 PM
|
|
Those are not resistors.. Some of the stock 3800 harness had diodes to prevent noise feedback ( spikes ) to the PCM. They are in the AC comp circuit. You also might be confusing a splice pack with a resistor. There are ground splice packs, pink wire switched 12 volt, and 5 volt reference.
http://www.fastfieros.com still doing wiring too..
|
|
|
|
Bfisher31286
|
SEP 02, 08:57 AM
|
|
|
Ya I think your right about the splice packs. They are both located on ground circuits. I guess I will just chop them out and free up those last few tangled wires.
|
|
|
CC Rider
|
FEB 22, 10:38 AM
|
|
|
|
|
The_potatoking
|
MAY 28, 03:59 PM
|
|
|
Hey fieroflyer. Just checking on my harness. It's been 7 dad since it was supposed to be ready. I've been pming you. Getting a little worried. My number is 9094358206
|
|
|
|
FIEROFLYER
|
JUL 22, 09:35 PM
|
|
| quote | Originally posted by The_potatoking:
Hey fieroflyer. Just checking on my harness. It's been 7 dad since it was supposed to be ready. I've been pming you. Getting a little worried. My number is 9094358206 |
|
Seeing as you have posted in here as well I will reply in here as well your package has now been sent out twice and came back at my expense for both ways both times. It will go back out again this week and hopefully the address you have given me works this time as it is getting quite expensive on shipping with it now being well over $160 so far at my end. Dan
|
|
|
|
djlamp14
|
JAN 23, 06:47 PM
|
|
|
|
|
FIEROFLYER
|
JAN 23, 07:23 PM
|
|
The ABS wiring with its connectors gets removed on the Fiero swap including wires for traction control going to the PCM.
All 3800 EVAP sensors can also be removed as well and just feed the Fiero charcoal canister with a vacuum source off the engine.
Wiring for the oil level sensor can also be removed unless you plan to add in an extra warning light for that.
|
|
|
|
djlamp14
|
JAN 23, 07:35 PM
|
|
As you can see it has wires going to a body connector. Some of these wires I've traced to cruise control. How will this part of the harness be adapted to the fiero
In this picture you can see the additional connector I'm talking about
http://i155.photobucket.com.../20140123_183300.jpg[This message has been edited by djlamp14 (edited 01-23-2014).]
|
|
|
