So i already have the steering but it's missing some pieces i think. iordered the horn plunger on the fiero store but i couldn't find anything about the plastic shroud that goes around the back of the wheel to hide the metal. im replacing the 88 wheel with the "elephant ears" as i just think it's the worst thing imaginable x.x. anyone have advice on where i could get or what i need?
Larry Hubbert
JUN 14, 09:46 PM
I believe someone who is doing 3D printing is making them. I purchased one from Russ Wormuth of RW Upholstery a short while ago. I will look over my shop and see if I have any on some of the 4 spoke wheels I have boxed up over there.
CFiberFiero
JUN 15, 01:07 AM
quote
Originally posted by Larry Hubbert:
I believe someone who is doing 3D printing is making them. I purchased one from Russ Wormuth of RW Upholstery a short while ago. I will look over my shop and see if I have any on some of the 4 spoke wheels I have boxed up over there.
Thank you! I'll keep checking back. I'd like to get into modding my fiero's interior... but for now I'd like to just make it complete!
CFiberFiero
JUN 15, 10:43 AM
here's a pic of what i mean (hope this helps)
[This message has been edited by CFiberFiero (edited 06-15-2025).]
Patrick
JUN 16, 03:20 PM
quote
Originally posted by CFiberFiero:
...the plastic shroud that goes around the back of the wheel to hide the metal.
When I changed the OEM steering wheel in my Formula to a MOMO unit with a custom made adapter, I had to find a longer plastic shroud. I ended up using one from a Firebird. There are probably plenty of other options at the wreckers.
IMSA GT
JUN 19, 05:19 PM
There are 3D printable trim rings on Thingiverse from one of our members on here but it's for the GT stock wheel and another ring for aftermarket hubs. https://www.thingiverse.com/thing:6972125
[This message has been edited by IMSA GT (edited 06-19-2025).]
