On eBay: Polished Aluminum Trim Rings for the Fiero Instrument Cluster by Dido Tuning (Page 1/2)
Vintage-Nut FEB 07, 09:39 AM
PFF member bjc 350 added these rings in a thread "Another Fiero made it to my house" / General Fiero Chat

I'm only sharing the information...

Dido Tuning
For Pontiac Fiero 1984-1988 Polished Aluminum Trim Rings Instrument Cluster x2
POLISHED OR MATT ALUMINIUM SET OF 2 ALUMINIUM RINGS / SURROUNDS


https://www.ebay.com/itm/225487420873?

Edit - I ordered a set; my order total was $34.28
------------------
Original Owner of a Silver '88 GT
Under 'Production Refurbishment' @ 136k Miles

[This message has been edited by Vintage-Nut (edited 02-07-2025).]

cliffw FEB 07, 10:53 AM
I saw bjc 350's post. Nice look, though there is no chrome on any Fiero I remember. I think that if they had chrome surrounds on all instrument cluster gages I would buy a set.
jjd2296 FEB 09, 10:57 AM
this is perfect for my car, I already have chrome door lock slides and chrome HVAC knobs. if anyone is interested, the chrome lock slides are just from any olds/buick from the 80s and the hvac knobs are from a 698 camaro I believe, they are all factory fits.
Vintage-Nut FEB 27, 09:10 AM
FYI
I ordered the rings on Feb 7 and received them from Poland yesterday, Feb 26

The rings are a friction fit and unfortunately, the rings I got are too small for the OEM holes by 0.07-inch
Rings OD are 3.57-inch
'88 OEM Panel ID Holes are 3.64-inch

I won't brother you with the fine details, however the manufacturer is sending a larger set.....
jjd2296 FEB 27, 09:26 AM
crap, im waiting for mine to show up still. stay tuned.
Vintage-Nut FEB 27, 11:10 AM
He had one panel and thought that all Fiero panels are the same....

I bet your rings will be 3.57-inch OD

It's easy to remove the panel with four torx screws

If the rings are too small, send photos like *these* and he will send you another set...
jjd2296 FEB 28, 01:30 PM
actually my rings just arrived and their too big! I then pulled two sets of instrument covers out of one of my boxes, one set the rings are too big, other set they are too small! It looks like there are a few different sizes of these dash covers that were made.
Vintage-Nut FEB 28, 02:52 PM
Send him an email and request 'your' size...
bjc 350 MAR 02, 01:46 AM
Mine were too small for the 84 car and also too small for the 88. After attempting to use their method of expanding the rings, to no avail, I used a few dabs of "Goop" marine adhesive and they stay in place fine. It seems they make a variety of these rings for many different makes as well as for other gauges and such. I think they add a nice touch. Might add a set to the digital dash in the 86, V8 car.
IMSA GT MAR 02, 03:47 PM
They are from Poland so they use a different measuring system over there. A few bottles of Vodka and a carton of cigerettes before they use the metal lathe

And yes, my family is from Poland so I can joke about these things