 
     |
| Wanted: 5-speed duke transmission parts (Page 1/1) |
|
842m4SE
|
NOV 23, 07:50 PM
|
|
I'm looking for the items for a 5 speed transaxle swap into an '84 duke, preferably in CA but some of the less heavy items could be shipped as well.
To my knowledge, this is what's needed, but there might be more I'm missing.
- 5 speed transaxle
- Transaxle mounts
- Shift/Select Cables
- 5 speed shifter
And some things that might be needed?
- Slave cylinder mounting bracket
- Slave cylinder
Any offers or leads would be greatly appreciated, based around Chico, CA but willing to drive to pick up.[This message has been edited by 842m4SE (edited 11-23-2021).]
|
|
|
|
Raydar
|
NOV 23, 08:27 PM
|
|
|
You'll at least need the Isuzu release bearing. Maybe replace the entire clutch kit, since you'll have it apart.
|
|
|
|
Raydar
|
NOV 23, 08:29 PM
|
|
|
.. [This message has been edited by Raydar (edited 11-23-2021).]
|
|
|
|
842m4SE
|
NOV 23, 09:00 PM
|
|
| quote | Originally posted by Raydar:
You'll at least need the Isuzu release bearing. Maybe replace the entire clutch kit, since you'll have it apart. |
|
Oh yeah for sure, these are just some parts I would get from a parts Fiero or one undergoing a swap.
Also plan to get a new throwout bearing, select arm rebuild kit (if Isuzu), new axle seals, and a shifter rebuild kit, as well as a new clutch kit.
|
|
|
|
thelinsells
|
NOV 25, 11:17 AM
|
|
|
I rebuild the Fiero shifter.In stock are 4 spd conversions to 5 spd and 5/6spd units.All are interchangable. Thelinsells@coz.net.
|
|
|
|
IMSA GT
|
NOV 25, 04:06 PM
|
|
|
Is this car an automatic and you're converting it to stick?
|
|
|
|
ekinodum
|
NOV 26, 05:21 PM
|
|
|
I have an '87 parts car with all this stuff. You can pull whatever you want. Sitting in a field in Paso Robles, CA, about 5-6 hours from Chico, though
|
|
|
|