|
northstar fiero based kit car (Page 1/5) |
|
john austin
|
AUG 16, 08:29 PM
|
|
As I need to trim my collection, I am offering the most unusual of them all. After building my northstar fiero I got the bug to go one step further. I took a kit that was intended to produce a northstar fiero and built a custom chassis and fitted it with a one of a kind Porsche 550 spyder body. My intent was to build a northstar fiero only 1000 lbs lighter. In addition to the northstar kit I used 88 fiero suspension, power disk brakes and steering. I know a project like this is hard to value but I've has estimates for its worth between 35k-40k. That is about what I have in it, but considering my situation I would let it go to the right person for 20k. Even if you are not interested in buying, I think all fiero fans will enjoy viewing. Hope Nelson will again help me post a couple of pics.
|
|
|
hnthomps
|
AUG 16, 09:24 PM
|
|
quote | Originally posted by john austin:
As I need to trim my collection, I am offering the most unusual of them all. After building my northstar fiero I got the bug to go one step further. I took a kit that was intended to produce a northstar fiero and built a custom chassis and fitted it with a one of a kind Porsche 550 spyder body. My intent was to build a northstar fiero only 1000 lbs lighter. In addition to the northstar kit I used 88 fiero suspension, power disk brakes and steering. I know a project like this is hard to value but I've has estimates for its worth between 35k-40k. That is about what I have in it, but considering my situation I would let it go to the right person for 20k. Even if you are not interested in buying, I think all fiero fans will enjoy viewing. Hope Nelson will again help me post a couple of pics. |
|
Email them to me and I will post them as soon as I get some spare time.
Nelson
|
|
|
dartrav
|
AUG 16, 10:36 PM
|
|
Sounds awesome, can't wait to see the pics.
|
|
|
hnthomps
|
AUG 17, 09:55 AM
|
|
Here are the photos as requested.
Nelson
|
|
|
Grantman
|
AUG 17, 05:31 PM
|
|
SWEET!! ------------------ 1986 Fiero GT fastback SC3800 3.4 pulley, FSIC, N*, 1.9 rollers 1985 Honda V65 Magna
|
|
|
sourmash
|
AUG 17, 09:54 PM
|
|
So how much does it weigh? That's a righteous setup there.
|
|
|
john austin
|
AUG 17, 10:08 PM
|
|
|
|
Dennis LaGrua
|
AUG 17, 11:36 PM
|
|
Great unique project and wish you luck selling it. You must have many hours into this creation. As long as it has a sub-frame its a saleable vehicle for the right buyer. ------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
|
|
|
olejoedad
|
AUG 18, 09:02 AM
|
|
|
|
john austin
|
AUG 18, 12:52 PM
|
|
one thing that may be of interest to fiero folk is the rear suspension. I started with the factory 88 parts, then went to a coil over setup. Additionally I made it a 5 link design. One of the benefits of the 5 link is that the entire suspension can be removed and reinstalled and the alignment is maintained. [This message has been edited by john austin (edited 08-18-2018).]
|
|
|
|