Sunroof tracks Stainless and powder coated mild steel (Page 1/26)
silver 85 sc APR 11, 05:21 PM
New price $78 includes shipping to lower 48 states

Well here goes, I am going to officially announce that I am going to produce new stainless and mild steel sunroof tracks or channels or whatever you want to call them. I hope to have the first run complete on Saturday. Since it appears that I will have to buy a full sheet of stainless to start I would like to get some verbal orders going. (notice I said verbal) I think I can get around 30 sets out of a 48" x 120" sheet of stainless. Price will be $75.00 plus shipping. Here is the original thread that started it all:

These will be made out of 20 ga (.036") 304 stainless steel with welded studs instead of the spot welded t-nuts (or the rivet nuts if I have problems studding them), so the channels will be flat and not have the indentations. I have the prototypes (made from powder coated mild steel) at work and if I can find a memory stick and get PIP to work I will be posting pictures. I can offer the mild steel also if anyone is interested, and the price will be $60.00 per set. Shipping will run around $10.00 per set/package.

And of course don't forget the other goodies I am putting together:

And yes, I will be putting together the 30th anniversary goodies, and will be putting the list together as the event draws closer. (Yes there will be numbered key chains just like the 20th and the 25th just for a heads up)


[This message has been edited by silver 85 sc (edited 01-02-2021).]

fierohobby APR 11, 05:29 PM
I'll make a verbal commitment to a stainless set.

701GT APR 11, 06:12 PM
i hope im on the list for a stainless set just send me a PM when you have a set ready with total to 47356
flimbob APR 11, 06:51 PM
I'm in for the stainless set.
Driver_WT APR 11, 09:07 PM
I will take a stainless set. I had also responded to the earlier post.


1984 Fiero, Black notchback, 355 SBC, 4 speed

FieroMaster88 APR 12, 08:42 AM
And as I said in the original thread Ill take a stainless set! Let me know when they are available.


88 Coupe: 2.0L Turbo 4 Cylinder
84 Indy #64: Restoration Project!

wolfwolf APR 12, 08:59 AM
I will take a stainless set. Send me a note when available with shipping to 54302. Do you take PayPal? Thanks
DLCLK87GT APR 12, 09:20 AM
I'm in for a set of SS, already sent a PM.
silver 85 sc APR 12, 05:34 PM
I am working on Saturday. We (my brother and I he runs the CNC roller) are going to try the short material, and we will see what happens. If we can get the 48" material to work I should be able to get 10 sets! If It doesn't work I will have to buy some material and try again.

silver 85 sc APR 15, 02:33 PM

The panel bender was scheduled for production yesterday so I was unable to get the channels formed. The material is cut and waiting for bending. I will get a set bent tomorrow on break or before work, and hopefully I can get the rolling done. Will keep everyone posted. I have sheared enough material for 8 sets. So keep you fingers crossed.