3d printed replacement skeletons available (Page 9/11)
Will MAR 03, 11:50 AM

quote
Originally posted by mmeyer86gt/gtp:

This is built to move the hvac to the bottom



Does the stock Fiero have a 1.5 DIN slot?

So your updated skeleton moves the HVAC panel to the bottom of the stack and squeezes in a double DIN above it? Does it keep the center stack vents?

I guess that means that the buyer has to make a trim panel to fit.
Raydar MAR 03, 04:15 PM

quote
Originally posted by Will:


Does the stock Fiero have a 1.5 DIN slot?
...
I guess that means that the buyer has to make a trim panel to fit.



Stock Fiero is 1.5 DIN.

There is at least one person (maybe others) doing double DIN trim panels. I've got one. (Zack Stewart on FB.)
It works as you described. HVAC on the bottom. Radio in the center. Vents on the top.

[This message has been edited by Raydar (edited 03-03-2022).]

Will MAR 03, 08:16 PM
Sounds like a good deal as long as the vents are still there.

I ask because removing the center stack vents to install gauges is somewhat common in the E30 community... absolute lunatics.
Raydar MAR 04, 11:26 AM

quote
Originally posted by Will:

Sounds like a good deal as long as the vents are still there.

I ask because removing the center stack vents to install gauges is somewhat common in the E30 community... absolute lunatics.



I have thought about taking the dash corner vents and turning them on their sides, placing them in (narrower) center stack vents. Would require some tweaking behind the faceplate, but may allow for more room below, to play with, for headunits and such.

Will MAR 04, 11:39 AM
If a double DIN fits without messing with the vents, I'm fine with not messing with the vents.

I'm thinking more about data loggers and track-oriented systems than tunes & beats anyway.

[This message has been edited by Will (edited 03-09-2022).]

flimbob MAR 13, 11:11 AM
pm sent
mmeyer86gt/gtp MAR 21, 07:29 PM
2 more stock skeletons to go out the door.
jdv MAR 30, 07:10 PM
Do you sell the face plate to go with the double din set up? Nice work!
mmeyer86gt/gtp MAR 31, 02:26 AM
yes the face place would be included with the doubledin.
Greg872.8SE MAR 31, 02:35 AM
Very nice product, I’m very interested in one. I’ve read thru twice so sorry if I missed it but is there a difference between the black and grey other than the obvious (color and price). Thanks.