[For Sale] High Quality Fiero Reproduction Stickers! (Page 9/18)
Danyel JUL 18, 01:12 AM

quote
Originally posted by IMSA GT:

Damn French people. Trying to get our American keyboards to type out hieroglyphics



hahaha dont worry we will not try to conquer north america..... like some people like to think

Edited ........ BUT i did conquer this page !!!!!!!!!

[This message has been edited by Danyel (edited 07-18-2014).]

JohnWPB JUL 18, 01:34 AM

quote
Originally posted by Danyel:




By the way, is this sticker supposed to be yellow and black, or white with blue? I just can not tell for sure from the photo.
As for the other sticker, I will get that one made as well.
JohnWPB JUL 18, 02:28 AM
Ok, here is the fill procedure warning in French. I do need the EXACT measurement of the sticker from edge to edge both top to bottom, and left to right in millimeters to print it out the exact size. The scaling is already correct, as I did that from the image posted.

[i]I always feel I have to say this, as when I look at the posted images in the thread, they always look TERRIBLE! They have to be reduced to post, but the original images are 1000 DPI, and will print so that even when examined closely with a STRONG magnifying glass, there will be no pixelation or jagged edges.

[This message has been edited by JohnWPB (edited 10-03-2024).]

fierogtx JUL 18, 06:39 AM

quote
Originally posted by JohnWPB:

Ok, here is the fill procedure warning in French. I do need the EXACT measurement of the sticker from edge to edge both top to bottom, and left to right in millimeters to print it out the exact size. The scaling is already correct, as I did that from the image posted.

I always feel I have to say this, as when I look at the posted images in the thread, they always look TERRIBLE! They have to be reduced to post, but the original images are 1000 DPI, and will print so that even when examined closely with a STRONG magnifying glass, there will be no pixelation or jagged edges as there are in the in the posted photo below.






many thanks for your help and work i took the pic on a parts car because mine if fading i will try to measure mine because the coolant really fade it . i just hope danyel have a one clean old stickers to measure it but will try on my old one to measure
fierogtx JUL 18, 06:43 AM

quote
Originally posted by Danyel:


I'll also take that one too ..... notice the other accent on the E its a É There may be also these È too
Danyel



hey danyel can you tell me if the stickers are white or yellow i took the picture on a parts car and will try to measure my old stickers but mine is really fading and hope that you can measure it because mine is in really bad condition will try to measure mine but if you have one in better condition to have the exact dimension it will be more on the scale

Steve25 JUL 18, 07:04 AM
Very nice! Well done.

Not my kind of thing but I can appreciate the effort that went into get it right.
css9450 AUG 03, 07:47 PM
Ever think about doing that little sticker that goes on the power brake booster? Its a little thing - maybe 1" x 3/4" only.

This is mine on my '88GT: As can be seen its a little peely.



Here is one in the junkyard - its on an S-10 booster of the type people are using for the "$100 Brake Upgrade": It would be interesting to have both kinds available.



I have no idea what the letters mean. And note also that although the decal is a white & silver plasticy sticker, there are some additional numbers embossed or stamped onto the right hand edge of it which I'm not sure if they can be reproduced. But if its doable - with or without the embossed numbers - this might be just the sticker some people are looking for for their cars.

Just throwing some more logs on the fire...
JohnWPB AUG 03, 10:57 PM
That would be a tough one.... I have no reference what the numbers/letters mean, and no way of stamping in the numbers on the end of the sticker.
css9450 AUG 04, 07:33 AM
That's OK.... I knew this one would be pretty arcane!

I have the S-10 booster on my car and it has no sticker - which looks better than the bad peeling sticker I had on the stock one.
Imnuts SEP 26, 03:32 PM

quote
Originally posted by JohnWPB:

Ok, FINALLY done with the 84 jacking instructions sticker. Just about everything as far as wording, images and such are different from the 85~88 jacking instructions.





Do you have one these for an 88 GT or does anyone have a good one that can be printed out?
Thanks