 
     |
| Personalized decklid vents and other things (Page 9/49) |
|
ace5514
|
MAR 31, 02:55 AM
|
|
well i don't want you to set fire to the shop!
all the carbon kits sold don;t cut the dash cluster lights out individualy. they just cut one long vertical rectangle out over each bank of lights. i can probably cut the plate around the shifter but the other three have too many cuts in them. i am not in a rush by any means but if could get an idea about cost and how much material would be needed i would start gathering the pieces. i don't want to get you messed up at work and carbon plate (cured resin) is too expensive to burn up, water jet might work.
if this is something you might want to try in the not real close future let me know and let me know sizes of sheets you need.
al
|
|
|
|
Bozzie
|
MAR 31, 12:56 PM
|
|
|
|
|
silver 85 sc
|
MAR 31, 07:16 PM
|
|
| quote | Originally posted by ace5514:
well i don't want you to set fire to the shop!
all the carbon kits sold don;t cut the dash cluster lights out individualy. they just cut one long vertical rectangle out over each bank of lights. i can probably cut the plate around the shifter but the other three have too many cuts in them. i am not in a rush by any means but if could get an idea about cost and how much material would be needed i would start gathering the pieces. i don't want to get you messed up at work and carbon plate (cured resin) is too expensive to burn up, water jet might work.
if this is something you might want to try in the not real close future let me know and let me know sizes of sheets you need.
al |
|
Let me check with the water jet people and see what they have to say.
| quote | Originally posted by Bozzie:
How are those new gastanks coming ? I would def. be interested in one.
Rick
|
|
They are coming slow. I am detailing these as much as I can. Since I have access to Solid Works I am painstakingly going through everything as accurately as I can. The more I do on the computer the more I will save on producing the prototype. The other issue is a car to fit these in. The tank that I am basing these on is out of an '87 SE. There are 3 Fiero's between me and my kids, however none have fuel tank or fuel pump issues at this time and all are daily drivers. As mentioned I hope (emphasis on hope) to have a set ready for the Dells Run.
Rich
|
|
|
|
silver 85 sc
|
APR 08, 05:28 PM
|
|
| quote | Originally posted by silver 85 sc:
|
|
Hit the jackpot today. I was able to retrieve enough material to do 5 sets of rocker covers.(The below the door strips) I have 3 interested people which leaves 2 available. Price is $65.00 and shipping is $45.00 UPS
Rich
|
|
|
|
Radfiero
|
APR 09, 10:02 PM
|
|
|
So what do I have to do to get a set of your custom GT deck lid vents and how much do they cost?
|
|
|
|
silver 85 sc
|
APR 09, 10:51 PM
|
|
| quote | Originally posted by Radfiero:
So what do I have to do to get a set of your custom GT deck lid vents and how much do they cost? |
|
Custom vents I consider an image sent by you that I convert. They are running $80.00 plus shipping. If you want the Fiero pegasus they run $50.00 and I will put any wording you want on them.
Rich
|
|
|
|
86gt2.85
|
APR 14, 11:50 AM
|
|
|
|
|
tbone42
|
APR 14, 02:23 PM
|
|
|
Yet ANOTHER PM sent to you, Rich.
|
|
|
|
Doug85GT
|
APR 21, 12:01 PM
|
|
|
I would like to buy a set of standard Fiero logo decklid vents and Pontiac rear bumper logo.
|
|
|
|
silver 85 sc
|
APR 21, 06:50 PM
|
|
| quote | Originally posted by Doug85GT:
I would like to buy a set of standard Fiero logo decklid vents and Pontiac rear bumper logo. |
|
PM sent
|
|
|
