Cupholder/Armrest (Page 62/90)
TXGOOD APR 01, 08:03 PM
I`m not familiar with those.
Do you use both or only one?
I would need the dimensions and where exactly you would want them.
1MohrFiero APR 02, 04:33 PM
No, I only need one module. That was just a picture I had. Here is a picture of it installed in my car.



It has some funny dimensions. I might have to send it to you. It is mostly 5/8" thick but face flares to 3/4" thick. It is 2" deep on top but 2 1/2" deep on bottom and 2 1/4" wide.

Let me know if you think it will work. I was hoping to have it installed in front of the cup holders on the face of the armrest.
TXGOOD APR 02, 04:51 PM
Let me take some measurements tonight and see if it will fit where you are talking about.
I`m not sure it would slide all the way in without hitting the liners.
I do know it would more than likely only work on a tall cupholder because there is less room on the short.
1MohrFiero APR 04, 12:52 PM
Mike, could it be mounted on its side on the outboard side of the passenger cup holder? If you don't think it will work you won't hurt my feelings. I might just have to relocate it to the overhead light area like others have done.
TXGOOD APR 04, 04:16 PM
Sorry for not responding sooner.
I forgot I had no tall cupholders made so I couldn`t take any measurements.
I just built a couple so let me measure it.


Ok, it wont fit between the liners.
I could either leave the passenger side liner out and put it sticking out the front on that side or possibly use a shallow liner on the passenger side if it would fit underneath.
If you have a spare one then you could send it to me and I could see if I could adapt it somehow.
If it doesn`t work I will just send it back.

[This message has been edited by TXGOOD (edited 04-04-2015).]

1MohrFiero APR 06, 08:15 AM
That's okay, Mike. I didn't really think it would work well. I think I will just order one of your regular ones soon. They look really nice. Let me get some money in the Paypal account.

Thanks,
Dwayne
css9450 APR 11, 05:44 PM
Got mine yesterday; installed it today. Looks great!
TXGOOD APR 11, 07:18 PM
Glad you like it. Looks good.
Thanks again for the order.
TXGOOD APR 14, 04:24 PM
Do any of you guys who have bought my cupholder know if you can get to the ALDL outlet just by removing one of the liners?
Thanks
css9450 APR 14, 10:01 PM

quote
Originally posted by TXGOOD:

Do any of you guys who have bought my cupholder know if you can get to the ALDL outlet just by removing one of the liners?
Thanks



Its funny that you ask; I was wondering that too and made sure to check when I installed mine. You can definately get to the ALDL through the passenger's side opening. Easy to get a paper clip into it. A flashlight would probably be helpful here.

I sometimes run mine with a scan tool attached and although I didn't check, it looks like the tool's plug just might fit there too. Its a little tight on the side by the 12V plug.