 
     |
| Sunroof tracks Stainless and powder coated mild steel (Page 6/28) |
|
flimbob
|
MAY 04, 06:44 AM
|
|
|
Are these the powder coated mild steel or the stainless?
|
|
|
|
silver 85 sc
|
MAY 04, 05:09 PM
|
|
| quote | Originally posted by flimbob:
Are these the powder coated mild steel or the stainless? |
|
I have one set of powder coated and one set of stainless
Rich
|
|
|
|
flimbob
|
MAY 04, 07:24 PM
|
|
|
|
|
silver 85 sc
|
MAY 04, 07:56 PM
|
|
The first batch is sold out. The second batch will be much larger and production will begin as soon as my material shows up. Hopefully the middle of next week. Just a note, I installed mine without removing the roof panel. I will get a picture of the tool I made to get the rivet washers installed under the roof panel then all you will need to install these are a putty knife, 1/8" drill bit, rivet gun, a 10mm socket and ratchet, and the gasket adhesive. Of course if you decide to glue/tape these in you will need the putty knife, gasket adhesive, rivet gun, and the10mm socket and ratchet.
The kit includes 20 rivets, 20 rivet washers, 8 6 mm rubber washers, 8 6mm washers, and 8 6mm nylock nuts. I included the extra rivet goodies due to I am glad I had them when I put mine together. The rubber washers go between the track and the roof panel, since the indentation is there from the t-nut on the stock tracks. This will help seal the hole and hopefully prevent the over tightening of the nuts. DO NOT OVER TIGHTEN!! When tightening the nut look watch the top side of the track. When you see the track start to deform stop. The nut is correctly tightened.
On the plus side we had a thunderstorm come through this week and I stayed dry in the car!! And that is with the original gasket.
Rich
|
|
|
|
ace5514
|
MAY 04, 08:24 PM
|
|
keep us posted..great thread bump
al
|
|
|
|
silver 85 sc
|
MAY 04, 09:55 PM
|
|
Round 2, 20 set run
1 nomomoney
2 tbone42 shipped
3 ace5514 shipped
4 fierohobby
5 DLCLK87GT
6 NOVAFIERO
7 BMTFIERO shipped
8 open
9
10
11
12
13
14
15
16
17
18
19
20
Should have some ready in a week and a half. Hopefully sooner.
Rich[This message has been edited by silver 85 sc (edited 06-06-2012).]
|
|
|
|
tbone42
|
MAY 04, 09:59 PM
|
|
|
|
|
ace5514
|
MAY 04, 10:04 PM
|
|
im in on this run.. stainless please!!.so when they are ready . . . pm me with the total and paypal instructions.
shipping to 07764
thanks
al
|
|
|
|
fierohobby
|
MAY 05, 10:29 AM
|
|
You can add me in for a stainless set this run as well. Thanks!
-fh
|
|
|
DLCLK87GT
|
MAY 05, 12:40 PM
|
|
|
sent you a PM the other day.......
|
|
|
