LOTS of parts from all years! (Page 49/57) Decaffrican JAN 23, 07:27 PM Would you happen to have any manual 4 and or 5spd transmissions for the 2.8L v6? handymanpat JAN 23, 07:41 PM I'm not sure what new ones cost but they probably are not that much .ore than I would charge? Let me know what new ones run and I will see if I am wanting to dig them out and ship them off to you. I know I have sold the getrag bracket in the past 75.00 so I would say 85.00 for both unless you have a different idea. Add 15.00for shipping. I don't know what new ones cost but I have seen them and they sure look a lot stronger than the stock ones. If they are quite a bit more then I would say buy mine, if they are not much more I would sure would buy the new ones. I can send you photos if you email me at handymanpat926@yahoo.com handymanpat JAN 23, 07:43 PM I wrote a reply but it looks like it went to the next page. Thanks Pat quote Originally posted by Carver1: I'm looking for both trans brackets for a getrag 5 speed. Hoping to find used before I order new ones. handymanpat JAN 23, 07:45 PM No, not at this point but maybe soon I will have a 5 speed getrag when I pull my engine and trans to put in the 4 speed automatic trans. Where are you located? I don't think it would be worth it to pay shipping. Thanks Pat QUOTE]Originally posted by Decaffrican: Would you happen to have any manual 4 and or 5spd transmissions for the 2.8L v6?[/QUOTE] Decaffrican JAN 23, 08:15 PM Located in SoCal, been trying to source a 5 speed to replace/upgrade my 85's v6 stock 4spd to a 5spd. At this point it seems like just getting another 4spd is easier than hunting down a 5spd. quote Originally posted by handymanpat: No, not at this point but maybe soon I will have a 5 speed getrag when I pull my engine and trans to put in the 4 speed automatic trans. Where are you located? I don't think it would be worth it to pay shipping. Thanks Pat QUOTE]Originally posted by Decaffrican: Would you happen to have any manual 4 and or 5spd transmissions for the 2.8L v6? [/QUOTE] handymanpat JAN 23, 08:50 PM I do have one and believe me it's worth the search to find a 5 speed, it's just amazing to cruise along in 5th down the interstate! How soon do you need it? I would think if there is any way to find one closer and avoid shipping it would be with the trouble and wait. You would probably have 650 to 700 into one from me with shipping. Thanks Pat QUOTE]Originally posted by Decaffrican: Located in SoCal, been trying to source a 5 speed to replace/upgrade my 85's v6 stock 4spd to a 5spd. At this point it seems like just getting another 4spd is easier than hunting down a 5spd. [/QUOTE] Decaffrican JAN 25, 06:40 AM Oh so you do have a 5 speed available? I'm willing to buy ASAP, been looking for ages now. Was talking to Larry about getting one from him but it's been tough getting a reply back in a timely manner. quote Originally posted by handymanpat: I do have one and believe me it's worth the search to find a 5 speed, it's just amazing to cruise along in 5th down the interstate! How soon do you need it? I would think if there is any way to find one closer and avoid shipping it would be with the trouble and wait. You would probably have 650 to 700 into one from me with shipping. Thanks Pat QUOTE]Originally posted by Decaffrican: Located in SoCal, been trying to source a 5 speed to replace/upgrade my 85's v6 stock 4spd to a 5spd. At this point it seems like just getting another 4spd is easier than hunting down a 5spd. [/QUOTE] handymanpat JAN 25, 08:49 AM I will be doing some swapping on one of the cars so that is where I could get a good one. The pricing would be somewhere in that price range I mentioned because of shipping and the hassle of pulling it right now from the car. Maybe show me you are serious by getting some shipping quotes from Round Rock Texas and we can go from there. Also, we are really burning up a lot of the page with all this back and forth so if you want to have these lengthy exchanges it is best to do messenger or my email. Handymanpat926@yahoo.com Thanks Pat quote Originally posted by Decaffrican: Oh so you do have a 5 speed available? I'm willing to buy ASAP, been looking for ages now. Was talking to Larry about getting one from him but it's been tough getting a reply back in a timely manner. SKJSS JAN 26, 06:25 AM Exhaust manifold for the 2.8? handymanpat JAN 26, 06:27 AM Which manifold? Trunk side or window side? Thanks Pat quote Originally posted by SKJSS: Exhaust manifold for the 2.8?