[For Sale] High Quality Fiero Reproduction Stickers! (Page 4/18)
JohnWPB OCT 27, 11:35 PM
Ok, in another thread, information came out that the belt routing diagram, on the 87 Fiero 2.5l cars, the sticker came in two versions. One black with white lettering, and the opposite, white with black lettering.

I have not yet seen one like this, and can not verify if it is fact or not. No one else has been able to verify this. If you have a sticker on your car like this, please let me know.

[This message has been edited by JohnWPB (edited 11-18-2013).]

1984whitesc OCT 28, 02:05 AM
I'm not sure if my car does still has the belt routing sticker, but I do know that it's not the same. I will take a look though.
JohnWPB NOV 18, 07:07 PM
Ok, thanks to a good photograph from 1984WhiteSE (Andrew), I have recreated the 1984 2.5 Emissions sheet. It took around 9 hours total working on it over the course of the past week or so in my free time.

It is, as the others are, is a 1200 DPI image (18.6 Megs) that has been greatly reduced to post here, which makes it look pixelated, which the original is not.

[This message has been edited by JohnWPB (edited 10-03-2024).]

JohnWPB NOV 18, 11:54 PM
Ok, the 1985 2M4 is also done! 90% of the 85 sticker is the same as the 1984, so with just minor modifications, it was not too time consuming to complete!

I also have the 1984 Jacking instructions about half way done. The images, text & font layout locations are completely different from the other years, so its pretty much a complete redo ....

[This message has been edited by JohnWPB (edited 10-03-2024).]

1984whitesc NOV 19, 10:08 PM
Gotta love an 84 lol. Always giving people headaches lol. When you get them done I'd like to buy a whole set.

------------------

1984 White Fiero Sport Coupe (Juliet) in restoration
http://www.fiero.nl/forum/Forum1/HTML/089093.html
1988 Red Fiero Standard Coupe (Bella) in restoration
1990 Black Buick Reatta (Noir)
2002 White Chevy Impala base(Haylie)

Quad Raider NOV 20, 01:14 PM
This is really cool. I'm swapping a Quad 4 into my '87 Coupe so I love the idea of getting customized emission and belt routing stickers.
JohnWPB NOV 23, 09:48 PM
Ok, FINALLY done with the 84 jacking instructions sticker. Just about everything as far as wording, images and such are different from the 85~88 jacking instructions.

PLEASE keep in mind these images are LOW RESOLUTION for posting. When the sticker is done, it is at a High 1200 dpi resolution

[This message has been edited by JohnWPB (edited 10-03-2024).]

JohnWPB NOV 23, 11:24 PM
The place I order the supplies to do my labels, screwed up my last order and sent me clear labels instead of the polyester white ones that I need for the stickers. (The part numbers are one letter off) I printed about 10 sheets of stickers on the material, and found out AFTER doing so. I just had to throw them all out I called them up to complain, and they have the correct ones on the way, and told me just to keep the remaining clear ones. I have about 10 sheets here.

This got me to thinking if there were any way that I could use them for something. There is no way to do white, as there is no way to print white on a standard laser printer. Lighter colors also do not come out very well, unless you stick them onto a light color background.

I started to mess around tonight and I was able to do Fiero logos for my center caps. I think they came out well. I loaded a photo of the car in Photoshop, and used the eyedropper tool to sample the color of the paint on the car, and used that color for Fiero logos.

Someone had mentioned above about doing center caps, and it looks like I can actually The problem is how to set the pricing and such. If it is a custom color, I have to use an entire sheet just to print the 4 center caps on. I can do a full sheet of 15 or so black ones, and this would keep the costs down for sure.

What does anyone think?

[This message has been edited by JohnWPB (edited 10-03-2024).]

bergingstrucker NOV 25, 04:51 AM
I've received my stickers last week. Looks great

Shipped within 10 days to the Netherlands
JohnWPB DEC 03, 01:57 AM
I tried something new, and unfortunately it did not work. I ordered the adhesive vinyl for the stickers last week, the same material, but pre-scored on the back. My thought was that it would make it easier for everyone to peel the backing off to apply the stickers. The problem is in the way they scored the back. It seems like they used a press or something to cut the slits in the back after the backing was applied to the vinyl. This made an indentation in the vinyl, that protrudes enough that you can feel it.

I thought running them through the laser printer would smooth it back out, but it did not. Then as a last ditch effort, I thought applying the clear overlay I put on the stickers to protect them would smooth it out. Again, it did not. So I have to call them first thing tomorrow to complain, and put a rush order on new material to get the orders out that I have.

I am sorry to everyone for the delay, and will get them out to you as soon as possible.

[This message has been edited by JohnWPB (edited 10-03-2024).]