Cupholder/Armrest (Page 32/90)
coady OCT 03, 02:19 AM
bumpity
mrfred8 OCT 24, 07:44 PM
bump
TXGOOD OCT 24, 10:05 PM
Alright, I`m almost there.
I`m not taking any orders yet but this weekend I`m going to start building some bases for the cupholders to see if I need anything in my shop.
At first, it may be slow going as I get used to working with a little different set-up.
The first few weeks I`m only going to be building cupholders so the console doors and gloveboxes will be on hold for a bit.
I will let you know Monday and I`m only going to take 3 orders at a time first to see how it goes.
The turnaround should be no more than 2-weeks depending on if you get something embroidered and how busy they are.
Thanks for everyone`s patience and I`m looking forward to turning all of my products out again.

Oh, by the way BV the set looks great in your car.

[This message has been edited by TXGOOD (edited 10-25-2012).]

coady OCT 25, 01:20 PM
That's great news!!!!
do you use any carbon fiber materials? Russ88TTop just done a ton of stuff in the charcol c/f for me and i would luv to have your stuff match it.
thanks
coady
TXGOOD OCT 25, 01:39 PM
To get it to match perfectly you might be able to buy some of the material from Russ.
I have done this before with Mr. Mike and FieroThomas.
I just give them the size of pieces I need, you pay for them and have them shipped to me.
I would just need to know which way you would want the carbon fiber running.
I have done one before.

Here is a picture of the one I did for a member.

[This message has been edited by TXGOOD (edited 10-25-2012).]

FieroJam OCT 25, 02:21 PM
Glad to see you are getting ready to start up production again I really like the updated way the cup holder/armrest is attached and will most likely be in the market for one here shortly.
coady OCT 26, 12:06 AM
hey txgood
can you send me your email so i can send you acouple of pictures of what i was thinking about.
coady
TXGOOD OCT 28, 07:16 PM
Anyone need a cupholder?
I have a few of the bases made and I`m pretty much ready to go.
It may take me a couple of weeks to get back on the console doors and gloveboxes.
mrfred8 OCT 28, 07:28 PM
I would like a cupholder in grey with the 12v outlet.

one of these


Let me know on here or PM me with paypal amount and instructions.

------------------
--Jeff aka mrfred8 aka (Hat tip to Mr. J. Jones!)
http://jalopnik.com/5901950...or-her-sweet-sixteen
- 88 Yellow GT
- 86 Silver SE

TXGOOD OCT 28, 08:11 PM
Just to refresh everyones memory I have two different versions of these.
A tall and a short.
The basic cupholder is 85.00 which includes shipping to the lower 48. Additional shipping charges for other areas.
Same color or contrasting stitching such as Black same price.
A 12v outlet is 15.00 more.
An embroidered Fiero emblem is 15.00 more.
If you are thinking about an emblem and you are considering eventually getting a console door, most people have had the emblem done on the console door as an emblem on both is a bit much. But, if you want it I will do it.

Oh, by the way, these are both older pictures and I don`t use the straps anymore. The attaching brackets are hidden as in the post of the Grey above.

The liners for both are 2-3/4" inside diameter and will hold a Wendy`s medium cup or similar tightly.
The shallow liners are 1-5/8" deep and the deep liners are 2-3/8" deep.


[This message has been edited by TXGOOD (edited 10-28-2012).]