Personalized decklid vents and other things (Page 31/49)
silver 85 sc JUN 19, 07:44 PM
Here's pics of the door tab.

Here it is on my '84 SE (I know no such thing as a GT in '84)


Here it is on my '86 SE fastback



Dimensioned



Rich
whitestar JUN 19, 08:30 PM
Rich, the door sill insert is exactly the way I had picture them. I knew when I was describing them to you , that you could make them! I will need a set of them and the sunroof tracks. Thank you
EvilSqueezles JUN 19, 09:03 PM
Ok I have to ask... You made that huge fiero sign with the Pegasus. Would you be able to make another one of those? And how much would it be to do so. Shipping is no issue since you live about 80 miles from me and I could pick them up. Wife had some ideas about making something for the garage with it. Thanks. Also, has anyone gotten the deck lid vents for a fastback with the biggest Pegasus you can fit on them and nothing else? Powder Oates with the house of kolor tangerine my wife picked would look amazing.

~James
CheshireGrin JUN 19, 09:28 PM
Just received my gauge surrounds and they look great.

Next question.... could you make the metal plates that go between the rear metal bumper and the frame? There are 2... if you needed a drawing I could probably make or find one. Mine are rusted all to hell and they are super hard to find ( so far at least)

Thanks again
Ryan
silver 85 sc JUN 19, 10:33 PM

quote
Originally posted by EvilSqueezles:

Ok I have to ask... You made that huge fiero sign with the Pegasus. Would you be able to make another one of those? And how much would it be to do so. Shipping is no issue since you live about 80 miles from me and I could pick them up. Wife had some ideas about making something for the garage with it. Thanks. Also, has anyone gotten the deck lid vents for a fastback with the biggest Pegasus you can fit on them and nothing else? Powder Oates with the house of kolor tangerine my wife picked would look amazing.

~James



I can make anything up to 60" x 120" Price would be $400.00 and it would end up coming out of a 60" x 60" piece of 16 ga or 18 ga stainless, depending on what is readily available.If I can get my hands on some blemished material,(minor scratches maybe a small dent here or there) the price would be lower. The large one shown was out of blemished material. I know we have 48" wide blemished material I'm not sure about the 60 wide. As for the vents, I have not done just the pegasus. I can though.



quote
Originally posted by CheshireGrin:

Just received my gauge surrounds and they look great.

Next question.... could you make the metal plates that go between the rear metal bumper and the frame? There are 2... if you needed a drawing I could probably make or find one. Mine are rusted all to hell and they are super hard to find ( so far at least)

Thanks again
Ryan



I would need either a print, sample, or a sketch. I use Solid Works for my drafting, I have access to press brakes, and welders, so I am sure I could come up with a suitable replacement. I would even be able to offer it in Stainless.

Rich


EvilSqueezles JUN 19, 11:16 PM
I wil be in touch about the vents. I basically want the biggest Pegasus you can fit. The emblem outline would be fine too. But the more material cut out the better as I will mesh and powdercoat/paint. The big sign is still on my mind, but I told her I need to ge my car built before I shell out that much ( which I expect is understood =P ). Thanks again.

Also, the vents would run 80 done that way? Or would that just be resizing an image you have and not considered custom?

~James
silver 85 sc JUN 20, 04:45 PM

quote
Originally posted by EvilSqueezles:

I wil be in touch about the vents. I basically want the biggest Pegasus you can fit. The emblem outline would be fine too. But the more material cut out the better as I will mesh and powdercoat/paint. The big sign is still on my mind, but I told her I need to ge my car built before I shell out that much ( which I expect is understood =P ). Thanks again.

Also, the vents would run 80 done that way? Or would that just be resizing an image you have and not considered custom?

~James



Resizing is not considered custom.

Rich
fierogtlt1 JUN 20, 10:01 PM
Do you still make the license plate frames?And if you still do,can you tell me how much it would be?
CheshireGrin JUN 30, 12:00 PM
Rich;
Re: The rear bumper plates
I traced mine out the best i could and made measurements on them but perhaps i should just send you them. They are rusted and arent very flat. Let me know what you think
Ryan
silver 85 sc JUN 30, 08:24 PM

quote
Originally posted by CheshireGrin:

Rich;
Re: The rear bumper plates
I traced mine out the best i could and made measurements on them but perhaps i should just send you them. They are rusted and arent very flat. Let me know what you think
Ryan



Can you get me photos with a tape measurer along the width and height? I have gone that route several times in the past with a lot of success.



quote
Originally posted by fierogtlt1:

Do you still make the license plate frames?And if you still do,can you tell me how much it would be?



I have license plate frames. They are $16.00 plus shipping.

Rich