Cupholder/Armrest (Page 26/90)
zap APR 21, 09:24 AM
Hi Mike,

Look forward to you getting your new shop up and running. I'm curious as to which style cupholder is ordered the most...the tall or short?

I will be placing an order with you when you get up and running again.

Thanks
TXGOOD APR 21, 01:42 PM
I have sold quite a few more shorter versions than tall.
I think a lot of people like the step down look of the shorter one.
I find the shorter liners carry most stuff just fine.
Mike
Rare87GT APR 21, 04:55 PM
Hey Mike, got a little twist for you. I have an aftermarket Pat Kalsmith fiberglass enclosure in place of the original. Would these fit or what modifications would you have to do to make it work? I attached a picture for you to see. Let me know if you have any thoughts as the angle might be a bit different than what you are making now. Thanks, Amir.


------------------

1 of 2: Graphite Grey Pearl 87 GT 5 spd: 2.8L (Best 1/4 mile: 15.57@87mph, 2.0 60ft)
2 of 2: Ferrari Red 88 Formula/4T65EHD: 2000 L67 Motor (Best 1/4 mile: 12.0@118mph, 1.89 60ft w/True Street Radial Tires not Drag Radials!)
New Engine on the Road again! FTW Motorsports style!
312rwhp/332rwtq

My CarDomain Site

TXGOOD APR 21, 05:18 PM
I could possibly make one, although it might cover up where it says "rare" because on mine, the liners go right behind that space.
You could just send me a cardboard cutout that followed the console.
Mike
Rare87GT APR 21, 05:25 PM

quote
Originally posted by TXGOOD:

I could possibly make one, although it might cover up where it says "rare" because on mine, the liners go right behind that space.
You could just send me a cardboard cutout that followed the console.
Mike




That's no problem. When I did my interior when I was younger, I had some bad style lol. So if it does cover up, I would be okay with that. Have you made any yet for the sub enclosure setup?
unique_GT MAY 22, 01:14 PM
Looking forward to getting one of these later in the summer when you are back.

Unique GT
zap MAY 22, 03:10 PM
Hi Mike...

Let me know when you start accepting ordes again.

Thanks,
Zap
Zap240z@aol.com
TXGOOD MAY 22, 03:49 PM
Thanks guys, I will let you know.
Mike
sirtimeless JUN 01, 09:42 AM
How well do these work with a short shifter?

I feel like any form of drink would get in the way.
TXGOOD JUN 01, 10:23 AM
I`ve sold a few with short shifters.
I think a lot of times they use the driver`s side liner for a phone or change and hold the drink in the passenger side liner.