Fiero Belt Tensioner (Page 26/27)
Dodgerunner JAN 08, 07:00 PM
In regard to the above post. All prices include shipping in the US.
reinhart MAY 24, 11:58 AM
Dodgerunner's site is down.

I bought his bracket a while ago but finally got the belt and tensioner. Would like to do the install but can't read the instructions since his site is down.

Anyone happen to save the instructions and could forward them to me?
PK MAY 24, 03:30 PM

quote
Originally posted by reinhart:
Anyone happen to save the instructions and could forward them to me?



DR very kindly sent me a couple of different versions of the destructions. I can email on to you. Just let me know how.

EDIT: done.

[This message has been edited by PK (edited 05-24-2023).]

reinhart MAY 24, 07:05 PM

quote
Originally posted by PK:


DR very kindly sent me a couple of different versions of the destructions. I can email on to you. Just let me know how.

EDIT: done.




Thank you! I hope it's just an internet thing and he isn't out of the business of selling these.
reinhart MAY 28, 03:01 AM
Got the job done today.

Took me about two hours although I'm fairly slow and of course I dropped one of the mount bolts down beside the mount and couldn't find the washer and had to find a replacement.

The product is a high quality product by dodgerunner. Fit perfectly. My only observation was the pass through hole to tighten the lower mount bolt was pretty useless to me. I had a 3" bar that was slightly too short and a longer bar 6" that was too long to get a ratchet on the end without removing the brake lines. It was slightly off as far as meeting up with the bolt hole and I was worried about stripping the bolt by using that even if I picked up a 4" bar, so I just used an 18 mm wrench to tighten the lower mount bolt.

Thanks again to PK for emailing me the instructions since dodgerunner's site has been down for at least the last week.
FieroG97J JUN 05, 09:47 AM
Now of only there were one of these for the 4-banger !
Oregon88 JUN 27, 01:14 PM
Mine is still working great after 6 years or so and I've recommended it to a few people recently.
Oz JUN 30, 09:14 PM
I'm thrilled to hear that these are still available. Email sent!
Visigoth87Fiero JUL 07, 08:48 PM
Worth every penny ,
Not one squeak from the belt with this tensioner assembly .
Have it on my 87 with the 2.8 for five years now and it still works great .
I recommend this product for everyone .
Oz JUL 10, 04:23 PM
I just got mine installed on my '87 GT. It took me about 50 minutes. I could do it in 30 --now that I've done one😆

This is a great solution and gives the car a modern update with the constant tensioner.

I can't recommend this bracket enough.