OPIE's Fiero GTX Build (Page 8/129)
TXOPIE FEB 09, 11:45 PM
Still playing with G6 Sedan inner door panels... studying the fronts and the backs to see how difficult.

[This message has been edited by TXOPIE (edited 02-13-2013).]

TXOPIE FEB 10, 06:29 PM
Preparig the power steering pump to be re-installed:

[This message has been edited by TXOPIE (edited 02-13-2013).]

TXOPIE FEB 11, 11:50 AM
Getting so Excited about the new G1 dash from Rob:

[This message has been edited by TXOPIE (edited 02-11-2013).]

TXOPIE FEB 11, 01:38 PM
Preparing to ship Rob the need parts for my G1 dash :

[This message has been edited by TXOPIE (edited 02-13-2013).]

TXOPIE FEB 11, 02:54 PM
Just got the OK and $ for also wrapping the center armrest piece in the same material with blue stitching...so I need to box this up and ship as well:

[This message has been edited by TXOPIE (edited 02-13-2013).]

TXOPIE FEB 11, 08:17 PM
UPDATE: Decision made on the head-lights after member "85SEnochie" PhotoShop'd up my two debated options...going with updated pop-ups. I like the look of them down too much to loose it with the other option:
TXOPIE FEB 12, 11:16 AM
UPDATE...will clean up all the errors with the picts...just re-organized my Photobucket folders...so need to re-link all photos...sorry!
TXOPIE FEB 12, 01:35 PM
UPDATE: Battery Cabling showed up via FEDEX:

1/0 cable:
TXOPIE FEB 13, 09:51 AM
UPDATE:

This project is about to be pushed into Overdrive! I had member "MstangsBware" / Steven give me a shout-out on my phone last night.
He has agreed to help me finish up all the mechanical work.
Two sets of hands are always better than one set!
And it sure won't hurt to have an expert like Steven that has more hours logged than most of us.

This weekend's Projects:

Install Bigger Brake booster & new master cylinder


Install black painted PVC pipes under the car on each side of the tank for the 1/0 AWG battery wire to run in for the remote battery.
Install new DYNA-BATT and run new 1/0 AWG battery wiring setup.



Install new AC condenser & 3 core aluminum radiator & all shrouds & splash guards.



Then Re-install the radiator fan.

So by the middle of march if all goes to plan...I should have the following completed:

Relocate Air filter to quarter panel area.
New wiring harness & PCM replacement installed.
SS Fuel Lines installed.
Rob / Amida new G1 Dash installed.
Corvettee C4 Sport Seats with new black leather & blue stitching
New interior headliner & trim pieces installed.
Power-steering Pump re-installed with a new West Coast Fiero's full-time power steering kit.


Then by mid-April I will have the following completed:

New HUB BEARING ASSEMBLIES (Will do Barbie's at the same time in prep for the drive to Indy...don't want a 25 year old hub locking up on my wife on that trip!)
New 12" Brake UPGRADE
New Sport Front Suspension from AMS
New Rear Bump-Steer Kit now from AMS

[This message has been edited by TXOPIE (edited 02-13-2013).]

TXOPIE FEB 13, 11:30 AM
UPDATE: Ordering a 87-88 Gen 2 Headlight Wire Harness & Rebuilt Motor Upgrade for her since she has the old worn out Gen 1 setup:
This images is larger than 153600 bytes. Click to view.