Sourmug's Decklid Vent Build ** 56K Warning!!** (Page 66/69)
Freeman OCT 03, 08:16 PM
Nolan -

Beautiful work, I've been following this thread for a while now. You even motivated me to start to work on my own dash swap. Great work with the door panels. would you be willing to share where you bought the polyuerothane foam (A-B foam?)? I've been looking around and have not found anything in any stores, and have always been tenative about buying things online. Again, great work.

-Jon
Sourmug OCT 07, 07:12 PM
My apologies everyone, I have not checked in for a while nor have I had the chance to make any progress on the car.

Thanks for you compliments, it's nice to know that you are all still interested. I hope to be able to do some work on the car in the near future.

Freeman: I purchased the two part foam from a local autobody supplier. I'm sure that you would be able to find a similar product in a similar shop near you.

Thanks again
Nolan
Sourmug OCT 09, 06:34 PM
I checked my receipts and the foam was actually purchased at a place that specializes in plastics, fiberglass and resins.

Nolan

[This message has been edited by Sourmug (edited 10-10-2008).]

whodeanie OCT 10, 12:54 PM
I just looked threw your build for the first time.
Nice Job! I will have to save as a fav.
RCR NOV 29, 07:56 AM
I just went through the whole thing again myself. So many good ideas. Bump for you, Nolan.

Bob
revin JAN 09, 09:50 AM
BUMP FROM THE PAST!!!!!!!!!!!!!!!

ok Nolan,

Super Great work! You are a master of these kind of things!

SOOOOOOOOOOOOOO.....

What happened to the dash wiring?!?!?!?!?!?!?!? (p.s. Send me the pin outs )

I hope the house is finished ( I can just image how THAT looks) cause I am having a fit cause the post have stopped for a while.
Sourmug FEB 05, 02:56 PM
Hi everyone.

Sorry that I haven't been around in a while and thanks for the comments.

I don't have any progress to report. In fact, I'm not certain about the future of this build. I seem to have hit a roadblock and just can't make any progress at this point. So much so that I am uncertain as to whether I will continue with this, sell it as a project, part it out or scrap the whole thing entirely. Time will tell.

Thanks for continuing to look at this thread, I hope that you have found it beneficial and helpful in some small way.

Thanks
Nolan
SAFASTRO FEB 05, 04:54 PM
Nolan,
Sorry to here about your loss of interest in this incredible build.
Let me know if I can take any of those parts off your hand!! I'd hate to see this build go to waste! Too much talent and hard work for it to be sent out to the scrappers.
If I can help.....let me know!!

------------------
Order your Official Pennock's Forum decals in this thread. http://www.fiero.nl/forum/Forum4/HTML/040445.html
Other decal, poster, banner, floor graphic needs, go here: http://www.fiero.nl/forum/Forum1/HTML/074429.html



2" Choptop
Shortened Front Bumper
Shortened Rear Bumper
10" Stretch
Dubs
350 V8 Conversion pushing 350 ponies!!

Jake_Dragon FEB 05, 06:39 PM

quote
Originally posted by Sourmug:

Hi everyone.

Sorry that I haven't been around in a while and thanks for the comments.

I don't have any progress to report. In fact, I'm not certain about the future of this build. I seem to have hit a roadblock and just can't make any progress at this point. So much so that I am uncertain as to whether I will continue with this, sell it as a project, part it out or scrap the whole thing entirely. Time will tell.

Thanks for continuing to look at this thread, I hope that you have found it beneficial and helpful in some small way.

Thanks
Nolan



I let my car sit for a year after putting the V8 in, then I installed the Norm flipper and let it sit for 6 months, mr. mike leather, its sitting again. As long as its not costing me money to keep it I will let it sit till its finished.
It helps that the car is drivable and I can take it out for a spin once in a while.

What ever you decide don't go into it lightly, I let my Charger go and have regretted it for 20 years.
johnyrottin FEB 21, 09:52 PM
I had to give this a bump back to the forefront. This has to be one of the most extensive and best build threads I have seen! If you ever decide to get rid of this machine let me know...I would be super interested!!!!!