 
     |
| Another Katatak Fiero Adventure! (Page 62/72) |
|
katatak
|
MAR 11, 10:34 PM
|
|
Tinkered on the Coupe a little this afternoon. Got the front end put back together and fired her up for a little bit. Maybe some exhaust will get built tomorrow!
The Wife went shopping so I took advantage and washed some parts in the sink!
Headlights back in, trimmed out and working!
Complete!
I removed the trim for the cowl and vaccumed out all the debris underneath it. After the new windshield is installed, I will scrub and paint it.
Dirty!
Clean!
More tomorrow!
Pat
|
|
|
|
josef644
|
MAR 11, 10:52 PM
|
|
|
White Fiero's are my favorite!
|
|
|
|
katatak
|
MAR 11, 11:18 PM
|
|
| quote | Originally posted by josef644:
White Fiero's are my favorite! |
|
I agree Joe! Even when it's dirty, it looks clean! This one will be painted white again when I get all the mechanical stuff done!
|
|
|
Rick 88
|
MAR 12, 05:05 PM
|
|
It gonna be even faster when you get done taking all the dirt out of it! 
|
|
|
|
katatak
|
MAR 12, 09:01 PM
|
|
|
I figure 75 pounds for the AC/heater stuff and 200 pounds for all the sand and dirt and mice nests - that's gotta be worth a pony or two?
|
|
|
|
katatak
|
MAR 15, 09:16 PM
|
|
Got some of the exhaust done today. From the firewall header flange to the muffler! Does not sound like much but I have been putting this off for too long now. Time to get busy. Got a lot of Fiero work coming up. New rotors and pads on the XTC plus re grease all the poly suspension bushings and Rick is bringing his Mera over on Friday to start the suspension lowering project and do some "tune up" work. We always seem to get busy when the heat kicks in around here.
More later!
Pat
|
|
|
|
katatak
|
MAR 16, 10:24 PM
|
|
A little more progress on the exhaust today. Got both side finished and welded up - just have to complete the connection to the muffler then build the tips!
More later!
Pat
|
|
|
|
Lambo nut
|
MAR 17, 09:55 AM
|
|
| quote | Originally posted by katatak:
A little more progress on the exhaust today. Got both side finished and welded up - just have to complete the connection to the muffler then build the tips!
More later!
Pat
|
|
Hey Pat, you need to get you some pads for those stands so you don't scratch the pretty paint!
http://www.harborfreight.co...ack-stand-95952.html
Kevin
|
|
|
|
katatak
|
MAR 17, 10:05 PM
|
|
Hey Kevin! I know. I always look at those at Harbor Frieght but never pick up some - I'll have to put those on the list!
|
|
|
|
katatak
|
MAR 17, 11:13 PM
|
|
A little more exhaust progress - no pics! Got the piece from the header pipe to the muffler fabbed up and started on the "flange" mount for the muffler. Got the flange welded to the muffler before I called it a night. I have to make an "adapter" to go from 2.25 pipe to the 3" flange mount. Then I can bolt the muffler to the exhaust and then build the hangers for the muffler. Once that is done, I can fab up the tips.
Got a bunch of suspension work to do on Rick's Mera tomorrow so the Coupe will be taking a break!
More later!
Pat
|
|
|
