Greengoblin's Build Thread! (Page 6/12)
s550w JUN 14, 11:44 PM
I agree its looking good. I do want to know how it rides on those bags. Suspension lubrication is real important with my 17" rims and it still a little hard on bumps.

Yours is currently crippled & mine is half naked.




I need to have my frame checked and fix/replace some broken pieces.
What a PIA to take the rocker panels off! Especially under the door.
greengoblin0129 JUN 15, 05:21 PM
I GOT MY BAGS IN TODAY!!!!!!!!!!
200PSI Slam Bags:

Also a car cover I got of ebay came in, and my free shirt from getting the bags

They forgot my 3 free bumper stickers, I want my money back now lol
I'm in the middle of replacing my axles and some other parts on my car:

I'll post more pics tonight if I get anything done on the car.
greengoblin0129 JUN 15, 07:54 PM
Well, not one thing has went well today. Went to replace my axle with one I had trade for from another member to find it is to long and the treads at the end are in bad shape. So I ended up taking it off my other Fiero while the engine is out of it getting a throw-out bearing. Then I pulled off a harmonic balancer from a extra 2.8 I have laying around to use on my car to find out the rubber peice on that is worn out as well. Fine, so I tried the other 2.8 I have laying around...dug that out from under my pile of parts lol to find its broke into well, back out to the garage...
ToonTownfiero JUN 15, 08:57 PM
Good build thread so far.
Keep up the great work.

------------------

greengoblin0129 JUN 19, 01:02 PM
I got all the parts I need to finish up the air ride. I'm in the middle of mounting the tank and compressure right now. My front suspenion is at my buddies house right now getting the bags welded in. I orded the GT turbo quarter window scoops, clear park/turn lights, and the stock 5" sub from the Fiero Store. Also got the Rodney Dickman's rear decklid shock kit in the mail today to replace my custom PVC pipe lol. Great quailty, worth every penny:

Front suspenion out of the car:

And a tester pic:

no suspenion on the front, so I lowerd it down and stuck the tires in there. Theres still a good 3 inches from the tires to the fender lining. Lot more pics on the way!
greengoblin0129 JUN 19, 11:05 PM
I went to check out a Fiero today to buy for a engine swap. All I have to say is, WOW! Test drove a 85SE with a 3800 with a ton of mods (guy gave me a 2 page sheet on what has been done to the car). Said it had 300HP/ 300Lb/ft and ran in the 11's. I belive it after driving the car
greengoblin0129 JUN 22, 06:33 PM
Got my parts in from the Fiero Store!
-stock sub
-clear turn/park lights
-Fiero intake scoop
-clips for molding
-quarter windoe scoops





The window that fits into the drivers side scoop is not even close to fitting so I have to see if they will send me a another one. The Passenger side one fits Great! I'll do a update tonight with more pics.
greengoblin0129 JUL 21, 11:09 PM
Thought I would post some updated pics:
Laying out:


Need to get some low pro's so I can lay out:

Engine:

At the Auburn show:
greengoblin0129 AUG 04, 05:12 PM
UPDATE, Fiero Store sent me the right glass piece to fit the scoops, and finally found some time to get them in.
Nurb432 AUG 05, 12:09 PM

quote
Originally posted by s550w:

Before you put a CD player in. get rid of that metal piece at the back & riveted to the plastic on the bottom. In my car, it is pushing the back of the cd player. Because it was mounted as far forward as possible at Best buy, it also means a CD will hit my shifter in park! I would have broken it off but, the plastic was too flexible.

Brian



Large/long screw driver and hammer.. You can pop the plastic right at the rivets, and pull them out. Leaves a crack in the plastic, but its still intact to easy to fix.. ( thou no one will ever see back there in the first place i never did fix the crack in either of mine).