dozol's build thread "FIERO REBORN" (Page 6/18)
dozol NOV 15, 04:00 AM
Hey Guys

I just ordered some parts from Jegs.

That would be: Performer Intake Manifold Base
Performer Intake Manifold Top
Max Pressure Regulator
Throttle Bracket with Return Springs

Those should arrive Friday.

I am also searching for a good clutch. I am not looking for a performance one because i am not planning on racing a car........ a lot
Stock will do for a while. So i did some research and this is what i came up with.

Please tell me if you have any experience with any of these. Note is it a 4 speed.

$ 55
http://cgi.ebay.com/ebaymot...dZ1QQsspagenameZWD1V

$ 80
http://cgi.ebay.com/ebaymot...dZ1QQsspagenameZWD1V

$ 140 doesnt say if its a 4 speed
http://cgi.ebay.com/ebaymot...dZ1QQsspagenameZWD1V

$ 135
http://cgi.ebay.com/ebaymot...dZ1QQsspagenameZWD1V

There are plenty here:
http://www.autopartswarehou...lutch_kit~parts.html

In the Fierostore there is a stock one for 170 bucks.

So what say you??

I am planning on spending less than 200 bucks.

thanks !

dominik
dozol NOV 15, 08:08 PM
sorry guys........gotta bump it to the top

dozol NOV 16, 08:08 PM
Hey Guys

Since when Santa comes in the middle of November and drives a brown truck?!
Jegs stuff arrived. Ordered on 14th, got it on the 16th. Awesome !








i bought the clutch from Rockauto, should arrive soon.....

what do you guys think?

dominik
prostreet505 NOV 16, 09:24 PM
I'm building this engine and I am always the last to know that Santa came early.

Looks good Dominik. It will look even better when it is installed on the engine.
dozol NOV 16, 10:22 PM
i might lack some inteligence but i dont get something here.

The carburator will be mounted on the top intake right?

So the fuel will be sprayed through the top, base intake and heads to the chamber?

i might have to look at howstuffworks.com heheheh

excuse my ignorance

dominik
JesseM NOV 16, 10:45 PM
I think that this will be a really nice fiero when you are done. I am anticipating seeing the whole thing put together. good luck!
dozol NOV 17, 12:14 AM
clutch will be arriving on November 21st.

BECK/ARNLEY Part # 0616020
4 Speed Manual Transaxle;232mm Diameter;1 Per Car
Clutch Set, 232mm Diameter;9-1/8" Diameter;14 Splines;4 Speed Manual Transaxle;1 Per Car


dominik

[This message has been edited by dozol (edited 11-17-2007).]

dozol NOV 18, 08:17 PM
updates ! updates ! updates !

purple and purple and some more purple









wires??? who needs wires?? its all wireless now !!!!!!!!!


dominik
Kyle1016 NOV 18, 09:05 PM
looks really good Dominik! I am excited to see the finished product
dozol NOV 20, 04:30 PM
updates again !!!!!!!!!!!!

I received the clutch from rockauto.
Whosaler Closeout --- 67 bucks shipped. What a deal.
now my favorite, pics








hopefully it will work ok, the disc looks solid, but what do i know.

what do you guys think??

dominik