FieroGT stretch Concept (Page 56/240)
Jake_Dragon APR 18, 07:22 AM

quote
Originally posted by Amida:


So, do the rockers on my Formula look the same as yours? Your GT rear bumper still will be better than the Formula. With the bevel cut on the bottom side of the Formula bumper it seems perfect for something to bolt up to it, don't you think?



Exactly what I was thinking, the black lip at the bottom would be easy to bolt to with a few holes. I was thinking about something close to what Bubba did but without the bottom flair and putting the tips in the stock locations.
The screen would help with air flow but help hide the cradle and exhaust pipe.
Amida APR 18, 04:30 PM
That is pretty low back there. It reminds me of the rear of a speedboat, there is this spoiler-like thing at the waterline with turnbuckles on it. I would raise it up a bit & give it a little angle too.
Jake_Dragon APR 18, 05:37 PM

quote
Originally posted by Amida:

That is pretty low back there. It reminds me of the rear of a speedboat, there is this spoiler-like thing at the waterline with turnbuckles on it. I would raise it up a bit & give it a little angle too.



I would cut the bottom almost flush with the screen, I don't care for the lip. But a 3 inch extension with a screen in the back around the exhaust tips.
I don't know, it will probably be a lot less work to just smooth a GT bumper
Amida APR 19, 12:10 PM

quote
Originally posted by Jake_Dragon:


I would cut the bottom almost flush with the screen, I don't care for the lip. But a 3 inch extension with a screen in the back around the exhaust tips.
I don't know, it will probably be a lot less work to just smooth a GT bumper



Maybe move the tips into the license plate nook & move the plate up. It's BurgerKing..have it your way!

[This message has been edited by Amida (edited 04-19-2008).]

pdemondo APR 19, 12:30 PM
Awesome looking Fiero.
Jake_Dragon APR 19, 12:41 PM
I have thought about that, but I'm too old school for that I like the tips where they are. I would put some in the front if I could and have surround sound

The Archie rockers disrupt the lines that are molded into the stock bumper, I could live with it if the line between the two colors was filled and the bottom of each side was widened another inch to match the rocker width.
Slice this part and cut the bottom of the bumper so it can be pulled out.




Then all I need is some 245s on the back
Amida APR 19, 12:57 PM

quote
Originally posted by pdemondo:

Awesome looking Fiero.


It's Bubbajoexxx's car .
Amida APR 19, 01:06 PM

quote
Originally posted by Jake_Dragon:

I have thought about that, but I'm too old school for that I like the tips where they are. I would put some in the front if I could and have surround sound

The Archie rockers disrupt the lines that are molded into the stock bumper, I could live with it if the line between the two colors was filled and the bottom of each side was widened another inch to match the rocker width.
Slice this part and cut the bottom of the bumper so it can be pulled out.

Then all I need is some 245s on the back



245s? How about 275s? So, do I have Archie Rockers? Look how small it makes the rear look.

[This message has been edited by Amida (edited 04-19-2008).]

PaulJK APR 19, 04:02 PM
Amida, PM question 2 U
CoryFiero APR 19, 04:11 PM

quote
Originally posted by Amida:

It's Bubbajoexxx's car .



Not anymore.