 
     |
| The Rottin Resurrection (Page 55/70) |
|
jetsnvettes2000
|
MAY 26, 11:57 PM
|
|
Parts arrived!!!!! Thanks to Vince at Snapperhead Performance we have a harness that fixes the tail light issue! Now it will blink where it should!! it is a very nice looking harness, all the ends are sealed really well and it has a nice nylon wire loom to protect it from rubbing! He also sent a bunch of cards and stickers to hand out so everyone who is working on this and helping out grab one!! He makes a great product!!
|
|
|
|
jetsnvettes2000
|
MAY 27, 12:02 AM
|
|
Been also working on making mounts for the fog lights. I have them in basic form now I just need to fine tune the shape a bit and drill bolt holes as I made them so the whole light assembly can be removed for servicing. the mount will get reshaped so it is all square and nice this is in rough form while it was being formed. it will be a nice square mount with a angled brace in the middle for added support once the shape is fine tuned with the cut off wheel and and paper.
|
|
|
|
eph_kay
|
MAY 27, 10:14 AM
|
|
| quote | Originally posted by jetsnvettes2000:
And the color choice is...........................................
|
|
Your gonna love the storm titanium, lotus does a very good job with it colors, having flake and depth without having it be too much.
I personally have a store titanium elise and the color is awesome!
Chris
|
|
|
|
jetsnvettes2000
|
MAY 27, 11:43 PM
|
|
| quote | Originally posted by eph_kay:
Your gonna love the storm titanium, lotus does a very good job with it colors, having flake and depth without having it be too much.
I personally have a store titanium elise and the color is awesome!
Chris
|
|
Cool had one parked here for a bunch of time while I converted the headlights to hid. My buddy owns it looks just like the pic above it is a great color but what a pain in the ass to change the oil!!!!!!!!! That bottom pan sucks to remove! They should have put a access door in it!
|
|
|
|
jetsnvettes2000
|
MAY 27, 11:46 PM
|
|
OK so now that all the flash is cut off the mounts I made here is how it will sit.
|
|
|
|
johnyrottin
|
MAY 28, 08:11 AM
|
|
|
|
JohnWPB
|
MAY 28, 09:53 AM
|
|
|
I have the same bumper, and love the way you designed the mounts for the fog lights. I will be borrowing your way of doing it when I put the lights in mine. [This message has been edited by JohnWPB (edited 05-28-2015).]
|
|
|
|
jetsnvettes2000
|
MAY 28, 10:17 PM
|
|
| quote | Originally posted by JohnWPB:
I have the same bumper, and love the way you designed the mounts for the fog lights. I will be borrowing your way of doing it when I put the lights in mine.
|
|
If I remember right the lights came from a dodge ram pickup front bumper. Or it was from a Grand am I had these siting on the shelf for years so the memory is a bit fuzzy where they came from. They are modified form original to remove the original mounting holes and other bits to make the part that sits on the fiberglass mount flat.
|
|
|
|
Tweeter
|
JUN 19, 01:33 PM
|
|
|
I like that color. When will it be done?
|
|
|
|
jetsnvettes2000
|
JUN 19, 03:10 PM
|
|
| quote | Originally posted by Tweeter:
I like that color. When will it be done? |
|
Shooting for early august The fabrication of stuff is almost done and final sanding of the body before fill primer is underway.
|
|
|
