The Rottin Resurrection (Page 53/70)
jetsnvettes2000 FEB 17, 09:51 PM
Hey shout out to Fierofool got the package thanks!!! John pay the man!!! Oh wait you can't due to your new address. I will gather up ten bucks and send it to the address on the package! John have fun hunting Here is a little pic I modified I think fits!! Oh not John in the pic just some random bad ass Hero!

jetsnvettes2000 APR 13, 08:44 PM
OK guys it is time to get back to work!!!!!!!!!!!!!!!!!!!!!!!!!!!

So tonight I spent the night getting all the lights to work and blinking. So far so good but now I am having a brain fart big time. I have the Norms tail light panel Euro tail light panel and in the directions he wants me to remove all the bulbs except the inner running and turn signal ones and scotch lock in a third plug. I do not like this as Jesus fasteners are nasty and I would like it to be a nice simple clean install without having extra sockets laying around in there. So, the question How do i remove the Pontiac little lights yet retain the plate light. Then remove all the sockets except the running lights/ turn signal lights. So basically i want to retain the 2057 lights 2 each side and cut out the rest How should I go about it?
VikingRedBaron APR 13, 08:53 PM
Side cutters is the tool of choice here
jetsnvettes2000 APR 13, 09:57 PM
Ok I have thought about this and I want the tail light wiring in the fiero to act like the tail light wiring in a c3 Corvette This should be fun to figure out. I basically want the outer bulb to blink be a running light and get brighter when I step on the brake just like a Corvette. the inner light I want as the backup just like a corvette. Now, how to do this?? someone here has to have done this already can anyone save me some thinking?

[This message has been edited by jetsnvettes2000 (edited 04-13-2015).]

jetsnvettes2000 APR 14, 07:10 PM
Figured it out, I need to wire it like a boat trailer with a converter. This will give the lights all the functions I want them to have with still retaining the backup lights. I just need to get the harness made up and replace the 2 outboard lenses with solid red ones then everything will be 100 percent legal. BEst part is it wil look and function just like a c3 Corvette

[This message has been edited by jetsnvettes2000 (edited 04-14-2015).]

jetsnvettes2000 APR 16, 12:41 AM
Sweet just got a PM saying we will be getting a custom made tail light harness made and donated! One step closer John to having your car finally!! Big thanks to Snapperhead Preformance!!

Edit adding his info here so I can find it easy!

Snapperhead Performance
3148 Plainfield Ave NE
Grand Rapids, Mi 49525
616-209-8217

Buy stuff from this fella for being a awesome member of the team!! Welcome aboard!

[This message has been edited by jetsnvettes2000 (edited 04-16-2015).]

jetsnvettes2000 APR 16, 09:56 PM
Got some work done tonight, I worked on the door hinge a bit as the lambo hinges rub on the fender inside a bit so I tweaked that a bit then I worked on fixing some cracks in the nose. I think when it shipped they flexed it a bit too much so I dig out the bad spots and redid them a bit so they are stronger. I am starting to fine tune stuff and get ready for primer I want to get it in primer by the end of may if the weather gives me the time I need to finish up the body.

[This message has been edited by jetsnvettes2000 (edited 04-16-2015).]

jetsnvettes2000 APR 17, 09:34 PM
Well too tired to do sanding tonight and was so nice out I decided to do more interior parts tonight. I still am not showing it till it is done but here is a sneak peak at one part wrapped in leatheret. Hmmmm looks good to me! Pain in the butt to do tho so glad these parts are done. Just 2 more parts to go and the interior parts for the most part are done except the door panels. Far as Door panels I am modifying them a bit I want to add speakers to them since the back speakers are not good.
johnyrottin MAY 10, 09:28 AM
How's about some pics and an update Rob man???
jetsnvettes2000 MAY 10, 10:17 AM

quote
Originally posted by johnyrottin:

How's about some pics and an update Rob man???



LOL ok They will mess with ya tho! Well soon as it warms up a bit it's only 50 out BRRRRRRRRR I am staying under this blanket till the sun comes out!!!

[This message has been edited by jetsnvettes2000 (edited 05-10-2015).]